I’ve got an axis rifle in 223 I don’t use and would love to turn it into either a 350 legend or 450bm. I see savage doesn’t offer the 450 in an axis platform so is this even possible?
Printable View
I’ve got an axis rifle in 223 I don’t use and would love to turn it into either a 350 legend or 450bm. I see savage doesn’t offer the 450 in an axis platform so is this even possible?
I would guess as long as you can find someone that manufactures a barrel for the savage and the right boat face then it should be good to goQuote:
Originally Posted by ohihunter2014
Sent from my SM-N975U using Tapatalk
http://www.shilen.com/chambers.htmlQuote:
Originally Posted by ohihunter2014
I'm looking there and I don't see for 50 bushmaster or 350 legend offered you may call them because I know they do custom chambers they just don't guarantee them like they do their line UPS
Sent from my SM-N975U using Tapatalk
Shaw makes a barrel for it. One thing I don’t understand is posts saying make sure it’s not stagger fed. Aren’t all savage mags stager fed? All I need is a 2rd mag.Quote:
Originally Posted by Ted_Feasel
I think they are staggered in the mag but like mine ends up center feed when the round is pushed up.Quote:
Originally Posted by ohihunter2014
Sent from my SM-N975U using Tapatalk
There are some many cheap rifles in 450 Bush now that it's cheaper to just buy a new one.
The older Model 10/110 actions had the magazine attached to the action and they were stagger feed.Quote:
Originally Posted by Ted_Feasel
I agree!Quote:
Originally Posted by Ronv69
I built a 450B a couple years back with a Green Mountain i6" Bull barrel I picked up for just over $100.
It went to the range one time. The only thing I ever owned that kicked worse was a 20ga rifled slug barrel on a TC Encore.
I had a 450B AR15 and there was no comparison in recoil.
https://lh3.googleusercontent.com/nM...w=w881-h308-no
Was a 243 HB, till I put the 16 1/2" GM barrel on it. Dandy shooter, but you can buy one finished cheaper.