replacement trigger

Printable View

11-26-2010, 06:06 PM
macon

replacement trigger

whats a good replacement trigger for the accutrigger
11-26-2010, 06:28 PM
drybean

Re: replacement trigger

sss comp trigger
11-26-2010, 07:35 PM
bobcat30

Re: replacement trigger

SSS comp ++++++1
11-26-2010, 08:54 PM
pdog06

Re: replacement trigger

Quote:

Originally Posted by macon

whats a good replacement trigger for the accutrigger

ANYTHING !(SSS, Timney, Rifle Basix SAV1 and SAV2).. You will have great improvement with any of them.
11-26-2010, 09:01 PM
macon

Re: replacement trigger

where can i buy a sss trigger
11-26-2010, 09:29 PM
1Shot

Re: replacement trigger

...unless it's a serious paper puncher I'ld keep the accu-trigger..Use the extra $100. bucks on the scope...I have several hole punchers that still have the accu-trigger on them..
11-26-2010, 09:43 PM
dcloco

Re: replacement trigger

Jard....hands down. They just started making them this year and did their homework.
11-26-2010, 09:45 PM
macon

Re: replacement trigger

i hate that accutrigger and its sub moa right now m- 12bgtvss 204
11-27-2010, 12:47 AM
82boy

Re: replacement trigger

Please do a search, this topic has been covered a few hundred million times.
11-27-2010, 01:09 PM
macon

Re: replacement trigger

well im sorry for bothering you sir.....
11-27-2010, 02:16 PM
macon

Re: replacement trigger

i wasnt trying to a wise guy jus asking questions ill do a search for now on
11-27-2010, 07:21 PM
Senderofan

Re: replacement trigger

Quote:

Originally Posted by macon

whats a good replacement trigger for the accutrigger

You didn't say which "Accutrigger" you were referring to? On my BVSS...I replaced with a Rifle Basix. With my dual port target action....the target accutrigger was not worth replacing! I found the target version to be a very superior trigger.

So, it depends on which version of the accutrigger that you are talking about, IMHO. The target version would be hard to beat, IMHO!

Wayne
11-27-2010, 07:41 PM
macon

Re: replacement trigger

its on a model 12 bgtvss
11-27-2010, 07:44 PM
geargrinder

Re: replacement trigger

Quote:

Originally Posted by Senderofan

You didn't say which "Accutrigger" you were referring to? On my BVSS...I replaced with a Rifle Basix. With my dual port target action....the target accutrigger was not worth replacing! I found the target version to be a very superior trigger.

So, it depends on which version of the accutrigger that you are talking about, IMHO. The target version would be hard to beat, IMHO!

Wayne

It also depends on which Rifle Basix trigger you are talking about. The Sav-2 is much better than the Sav-1. The Sav-1 is basically just a 3 screw factory trigger.
11-27-2010, 09:01 PM
Senderofan

Re: replacement trigger

Quote:

Originally Posted by geargrinder

Quote:

Originally Posted by Senderofan

Quote:

Originally Posted by macon

whats a good replacement trigger for the accutrigger

You didn't say which "Accutrigger" you were referring to? On my BVSS...I replaced with a Rifle Basix. With my dual port target action....the target accutrigger was not worth replacing! I found the target version to be a very superior trigger.

So, it depends on which version of the accutrigger that you are talking about, IMHO. The target version would be hard to beat, IMHO!

Wayne

It also depends on which Rifle Basix trigger you are talking about. The Sav-2 is much better than the Sav-1. The Sav-1 is basically just a 3 screw factory trigger.

Should have said I replaced with a SAV-2...using the heavier spring....Red I think. Anyway, it's a much better trigger than the "Standard" accutrigger, IMHO.

Wayne
12-01-2010, 07:12 AM
Agueybana

Re: replacement trigger

I try them all Timney, Sharpshooter, Riflebasix and Riflebasix 2. My favorite one is Riflebasix 2. Is a true drop in part. Also it can go down to 4 onz if you need it. Real easy to adjust, but it cost a little more.