Printable View
Am I safe in using say a Speer load manual load data on different brand of bullets?
Example: 52grn boat tail hollow point speer bullet info, is it ok to use that same data on hornady bullet 52 grn hollow point boat tale.
If yes does that mean I could cross over speer data to any bullet brand as long as bullets is same style and weight?
Thanks for your help
Curtis B
You will be fine if you use min load made for the bullet you are using, and go up from there.
Dean
^^^^^^What Deano said^^^^^^^ Just don't use lead bullet loads as a guide for copper/mono metal bullets.
As long as you are using "Like construction" then yes, data is data.
Plated bullets, such as the Deep Curls, or Dead-Soft copper that has been heat treated(Barnes) are their own animals.
This is a "mid range" load for a regular jacketed bullet, only the Deep Squirrel substituted.
http://i78.photobucket.com/albums/j8...psmopqcu83.png