Printable View
Searching for an Armalite AR-10 barrel source. I found one called Accurate Shooter, or something like that, however they want $700 for a barrel. There are plenty of DPMS styles out there but no luck on the Armalite. This would be for a 26" 243 bull barrel.
Well, I just scrolled down and found one Black Hole Weaponry a sponsor here! Any other ideas would still help though.
I thought DPMS and Armalite patterns used the same barrel extension and only the barrel nuts were different.
I am not sure the AR barrel thing is new territory for me.Quote:
Originally Posted by DrThunder88
This page seems to indicate the barrels (specifically the extensions) are cross compatible so long as a corresponding pattern bolt and carrier are used. It has been a while since I built my DPMS-pattern .308 AR, so I'm a little rustier than I thought.
Apache gunworks will make them in either pattern.
I am 99% on if you use a DPMS barrel on an Armalite you will need a dpms pattern gas block and gas tube. The reason being the armalite gas port is in a different location and the gas tube is longer. This makes the use of the DPMS block and tube critical.