Savage model 1903 stock removal questions

Printable View

04-06-2015, 10:27 PM
Savage7491

Savage model 1903 stock removal questions

I mentioned in my introduction that I recently acquired a fairly decent model 1903 pump 22. Internally in great shape, externally had a little more "patina" than I care for...most of which was removed w 4/0 steel wool and WD40. The stock is in pretty good shape except for a small repair on the lower tip which I want to deal with, but the overall finish was pretty crummy so I also want to refinish that. Can anyone give any tips on removing the stock on the model 1903..if you've had any experience w that? Thanks very much for any input.

Randy A.
04-07-2015, 09:55 AM
Mad Dog

Pretty sure the only screw holding it on is the furthest one towards the back of the top tang, once it's removed the stock should just pull off.

All times are GMT -4. The time now is 07:46 PM.

Powered by vBulletin® Version 4.2.5
Copyright © 2024 vBulletin Solutions Inc. All rights reserved.

Savage Shooters is in no way affiliated with or endorsed by Savage Arms.

The sole purpose of this site is to provide an online community for those who wish to interact with other Savage firearm enthusiasts.
The information and opinions expressed within this site are those of its contributors, and in no way should be viewed as the opinions or recommendations of Savage Arms.

This site utilizes affiliate programs to generate revenue and as such purchasing a product reached by clicking on a link on this site may earn us a small commission on that sale.