My 11/111 Trophy Hunter XP Conversion to Tacticool
Saw lots of questions and figured Id show you my conversion to Boyd's Tacticool on my Trophy Hunter XP.
This is the stock you need. Note, if you have a long action, both stocks from the drop down menu, 111 and Trophy Hunter, are the same stocks and meant for the long action version.
In addition I ordered these parts from Savage:
http://i.imgur.com/doLZkr9.jpg
Part No. 106705 - Frame Assembly $78
Part No. 107217 - Trigger Guard $26
Part No. 106235 Magazine Box Assembly $51
I also ordered longer screws as advised by some people but the longer screwed ended up shanking out, so I used the factory. Also, you can use the factory trigger guard, but it's a good step up from plastic if you just order the metal one with everything else. The frame and trigger guard fit snug into the Boyd's stock so I put those in then dropped in the rest and bolted it up. Torqued it snug until I can get my torque wrench on it.
http://i.imgur.com/ZfhWnC8.jpghttp://i.imgur.com/fFakT6t.jpghttp://i.imgur.com/xESnWnY.jpg