Printable View
I have a Savage model 112 223 cal has an accessory rail under the stock like to know if a rail adapter is available in order to mount a bipod, has a laminated stock with built-in cheek rest competition bolt and blackened stainless steel barrel,this rifle out of the box shot a 20x target @200 yds in a match.
Yhanks
Here is a page with several: http://www.harrisbipods.com/
I used this one on mine: http://www.harrisbipods.com/HB6A.html
You have to check the rail size to get the right one.
There's some fancy set-ups out there if you're into spending money, but as JackinSD basically pointed out, all you really have to do is get a sling stud adaptor for that rail. Then you attach the Harris bipod to the sling stud just like any other rifle. I can't remember the rail width on the 112 BT as it's been a long time since I've dealt with one, so as Jack pointed out you'll need to measure the rail width to make sure you get the right one. Harris makes the model #6 and #6A adapters, each for a different size rail. I'm sure there's plenty of places to buy them, but I've bought a couple of them from Midway in the past, so I know they have them.