Need Help with Savage M12!!!
I had my Model 12 out today cleaning it. I went to push down the lever to replace the bolt and snap! It broke down next to the trigger assembly. Now I cant shoot without taking it apart to reset the trigger. Where can I buy another part and what is the name of it?
Re: Need Help with Savage M12!!!
How did you manage that? It's the sear you need to replace and you can get it from SharpShooterSupply. Just a BTW, but you do know you have to push down the lever and pull the trigger to get the bolt out. Just thought I would tell you, if you thought you just had to push the lever.
Re: Need Help with Savage M12!!!
Sear/bolt release lever, it's all the same mechanism.
Re: Need Help with Savage M12!!!
Not that this helps your issue, but you only need to pull the trigger to put the bolt back in the gun.
Re: Need Help with Savage M12!!!
Quote:
Originally Posted by Budweiser360
How did you manage that? It's the sear you need to replace and you can get it from SharpShooterSupply. Just a BTW, but you do know you have to push down the lever and pull the trigger to get the bolt out. Just thought I would tell you, if you thought you just had to push the lever.
Dont know what happened. I really didnt push down on it hard at all. I was kind of hoping it was a recall on it but oh well.
Thank you very much for your help!
Re: Need Help with Savage M12!!!
Quote:
Originally Posted by Budweiser360
Sear/bolt release lever, it's all the same mechanism.
So out of this list I need to choose Sear or do I need to find Sear/bolt release lever?
Re: Need Help with Savage M12!!!
Re: Need Help with Savage M12!!!
Quote:
Originally Posted by JasonL
Quote:
Originally Posted by Budweiser360
How did you manage that? It's the sear you need to replace and you can get it from SharpShooterSupply. Just a BTW, but you do know you have to push down the lever and pull the trigger to get the bolt out. Just thought I would tell you, if you thought you just had to push the lever.
Dont know what happened. I really didnt push down on it hard at all. I was kind of hoping it was a recall on it but oh well.
Thank you very much for your help!
"Hard at all"? Did you pull the trigger before you pushed the lever?
Re: Need Help with Savage M12!!!
Quote:
Originally Posted by steveinwv
Quote:
Originally Posted by JasonL
Quote:
Originally Posted by Budweiser360
How did you manage that? It's the sear you need to replace and you can get it from SharpShooterSupply. Just a BTW, but you do know you have to push down the lever and pull the trigger to get the bolt out. Just thought I would tell you, if you thought you just had to push the lever.
Dont know what happened. I really didnt push down on it hard at all. I was kind of hoping it was a recall on it but oh well.
Thank you very much for your help!
"Hard at all"? Did you pull the trigger before you pushed the lever?
No I did not pull the trigger. For some reason I just wasnt thinking.
Re: Need Help with Savage M12!!!
Quote:
Originally Posted by Budweiser360
Sear.
Thanks again!
Re: Need Help with Savage M12!!!
Quote:
Originally Posted by JasonL
Quote:
Originally Posted by Budweiser360
Sear/bolt release lever, it's all the same mechanism.
So out of this list I need to choose Sear or do I need to find Sear/bolt release lever?
They are the same part, so order whatever part covers both of them.
Re: Need Help with Savage M12!!!
Just ordered it from Sharpshooter. Thanks for all the help!
Re: Need Help with Savage M12!!!
No problem, when in doubt, DON'T use a bigger hammer ;D
