Putting a .308 barrel on a 10fp with stock .223 barrel Questions
I thought about getting a .308 barrel to replace the .223 barrel on my 10fp and was wondering what all would have to be changed besides the bolt head? Thank You! :)
Re: Putting a .308 barrel on a 10fp with stock .223 barrel Questions
What kind of magazine setup do you have?
Re: Putting a .308 barrel on a 10fp with stock .223 barrel Questions
Quote:
Originally Posted by nate89
What kind of magazine setup do you have?
Hmn! not really sure but, I'll check into it all I know is it's not removable I think the stock uses the newer action screw spacing if that helps any. Thanks :)
Re: Putting a .308 barrel on a 10fp with stock .223 barrel Questions
You most likely have a centerfeed blind magazine. You may have to switch out the mag box and follower.
Re: Putting a .308 barrel on a 10fp with stock .223 barrel Questions
I believe your right about the center feed because when I was looking at B&C Gold Medalist stocks that's what stock style I needed. Thanks Again for the info! :)
Re: Putting a .308 barrel on a 10fp with stock .223 barrel Questions
If you go single shot, all you will need is the single shot follower (SSS), barrel and bolt head/baffle.
Re: Putting a .308 barrel on a 10fp with stock .223 barrel Questions
Quote:
Originally Posted by GaCop
If you go single shot, all you will need is the single shot follower (SSS), barrel and bolt head/baffle.
That sounds like a winner to me. Thank You! :)
