Whats is a good load/bullet/primer for the 10 FLCP-K 308?
Printable View
Whats is a good load/bullet/primer for the 10 FLCP-K 308?
whats your purpose for it? terrorize paper, varmints or med to big game (deer/piggies/etc.)?
Brian
I have a savage model 10. My load is 42.5 grains of IMR 4895 and CCI BR-2 primer and 175 sierra MK. I'm about .003 of the lands. I average .5's to .6 if I do my best i can get in the .4's
I don't have any pressure signs.
A caution to you just in case, sierra's load manual has 41.5 grains as max. so of course as always start 10% lower and work your way up.
Medium sized game (PA deer) and ground hogs. Not really concerned with "excessive" bullet weight for the occasional ground hog hunt.
I want to be in the -/=0.5" ctc group at 100 yards just in case I want to reach out with the 308 on ground hogs.
I've had good luck with fed case, 165gr ballistic tip, cci large rifle primer and 43 grain's IMR 4064, 20 tho. off lands, in my 10FP 24'' barrel. This load shoots under half inch.
Dan
Thanks for the loads. I have some 4895 and cci lr primers.
I have the same rifle. 45gr Varget, 210M primer, Win brass and 168 A-Max .010 off the lands. Shoots bug hole a 100 yards and good to 600.
.308 cal
110 grain V-Max
41.3 grain H322
COAL 2.740”
Trim Length 2.000”
This is my go to load....I can put them all in the same hole at 100yds...they shoot 2920fps...
Jesse
i sorry but ive been told on other forums the the amax and vmax are not for hunting with i looked in to them and most of the have the same S.D. as there sst and interbond in the same bullet and weight could some one fill me in
as for the hunting load in the 308 id go with the 165 sst on top of old faithful varget
I don't know about hunting application, but Snipers in the Military and Police shoot people with SMK's and I know SMK's are not for hunting applications, but it kills things.
The 110 Vmax is a bad little bullet...
Jesse
i use 110gr vmax w a 47gr dose of imr3031 and i chrono'd them running at 3175. the diff in fps for my 5 shot group was 5 fps! and this was on my factory barrel and i still got under an inch groups. i need to give them a go on my new mcgowan barrel and see how they do.
my lupy cds scope turret adjusts all the way to 700 + yrds w this loading. i doubt i will ever shoot that far though.
brian