223 wylde head space gauge question

I am not sure I am in the right section but,
I am getting a new barrel in 223 rem wylde and wondering if the standard 223 Rem head space gauges will work properly for setting the head space.
I have seen 223 wylde gauges( all out of stock) so there must be a difference
Thanks for your input
Jack

Hi Jack ! I had a similar question recently on .223 rem. You'll find chamber dimension variances for different mfgs. including the Wylde by going to: r/l standard cartridges page # 15 and look for my post " .223 rem. SAAMI specs needed". If you know the mfg. of your present hd space gauge you can compare it to Wylde specs. & add a shim or tape to the base of your .223 gauge to match the Wylde specs. ( Wylde chamber will be longer) Chk. the specs for the base to shoulder length. If you have a cartridge hd space gauge for .223 rem. you can also measure your present gauge and compare to the Wylde specs & add scotch tape accordingly to base of your gauge. Hope this helps, Dale Forgot to mention the shoulder angle on all .223's will be the same except .223 AI.

Thanks for the help Gotcha,
Your post mentioned answers my question
Jack