I have a new savage 110 ultralight in 7mm PRC. Each time I fire, the recoil engages the safety. Same if I drop buttock on the ground. Seems safety is too lose. Otherwise safety works fine in all 3 positions. Anyone else have this issue?
Printable View
I have a new savage 110 ultralight in 7mm PRC. Each time I fire, the recoil engages the safety. Same if I drop buttock on the ground. Seems safety is too lose. Otherwise safety works fine in all 3 positions. Anyone else have this issue?
Sounds like the safety screw on the trigger assembly needs adjusted. Access to the screw is typically plugged by Savage with a white or yellow plug that would need to be picked out to get access to the set screw.
Did savage change the design so that the safety can be engaged without the bolt being cocked? After firing- the safety (on older models) could not be moved until you run the bolt....Quote:
Originally Posted by Jonathanelon
Nope, not that I'm aware of. Safety should only be able to engage when the firing pin is in the cocked position. Ditto with the half-safe position.Quote:
Originally Posted by Whynot