I am in the process of making a second bolt for my Model 10
and I'd like to know to a T what the exact needed pieces are,
where I can buy them and if it is something that is possible
and wont leave me with a destroyed rifle.
Jake
Printable View
I am in the process of making a second bolt for my Model 10
and I'd like to know to a T what the exact needed pieces are,
where I can buy them and if it is something that is possible
and wont leave me with a destroyed rifle.
Jake
You can use this schematic here. It’s for a model 12 but should be the same parts.
https://www.gunpartscorp.com/gun-man...-series/12bvss
Also, 2 different bolts may have different headspace in the same rifle, so make sure to use go and nogo gauges with both to make sure there’s no issues.
You can get everything between Gun Shack & Numrich.
Let's not forget tat there are also 2 different firing pin systems used. The new pin is one piece and nonadjustable. Also the pin springs are not the same.
If one is acquiring all the parts to have a spare Bolt assembly, it only makes sense to use the adjustable firing pin assembly. It’s higher quality.Quote:
Originally Posted by KMW1954
Not a judgement of better or worse, just that there are 2 different units and the parts do not interchange. That is all it is.Quote:
Originally Posted by Dave Hoback
Why do you need a second bolt?
Thats the truth! Buying all the parts separately it would end up costing around $225!Quote:
Originally Posted by Rewinder