-
Savage 24 series S
https://photos.app.goo.gl/CJwkAtXbY7FE5u1n6I'm looking for a part for my Savage 24 Series S (S/N E209195). I'm not sure what the part is called but it's a plastic piece on forward of the trigger guard that you pull to release the break action. Mine is broken in half and I'm having a hard time finding a replacement. I've called Savage directly and searched the internet with no luck. Attached is a picture. There is a hole in the part and there may have been a pin to hold it in place but if there was on I lost it when it broke. I have been unable to find a parts diagram for this series. The diagrams I find online all show the break lever on the top of the receiver. Any help would be greatly appreciated! Ryan
click the link below to see the picture of the part
https://photos.app.goo.gl/CJwkAtXbY7FE5u1n6
-
That’s going to be a difficult part to track down. May have to look at having a custom piece made. Is it a flat piece, or is a curved over part with 2 sides? Hard to tell from the single photo. What’s it made of? 2-part epoxy may work to get it back together.
-
Savage 24 schematics
