Printable View
I have a 1951 Model 24E 22/410 O/U with the barrel selector on the hammer. Missing rear sight. 3/8" dovetail is too big. Can't find a 5/16" dovetail base anywhere made for this gun. And yes I used a machinist caliper to measure the dovetail, it's 5/16. Any help would be greatly appreciated. Thanks
GPC shows one with a 3/16" dovetail. Rear Sight w/o Elevator, 2.25" OAL | Gun Parts Corp.
Bought one of those from Numrich
Not at all as sturdy as original
Much thinner metal construction
Jimmy
If you haven't found what you're looking for you might try here...
https://gun-parts.com/savagerifle/
Good Luck