base and rings for 110 125th Anniversary short action round top?

New 110 125th Anniversary in .300 Savage..any suggestions for bases and rings? Mounting a 3x9x40mm

I always like this option.

https://www.talleymanufacturing.com/...-scope-mounts/

A few years back I tested some DNZ one piece mounts. All my bolt guns
now use these. My favorite is the tactical with the 4 screws per ring
and 20 MOA machined in if you ever need it for that longer shot.

Quote:

---

Originally Posted by Fuj'

A few years back I tested some DNZ one piece mounts. All my bolt guns
now use these. My favorite is the tactical with the 4 screws per ring
and 20 MOA machined in if you ever need it for that longer shot.

---

Those are some nice looking mounts.

I like DNZ mounts as well.

I won't be taking off my Talley's but I will definitely be considering the DNZ for a short action I have sitting in the safe.

Been a big fan of the DNZ products for years now. Very light weight mount setup and the quality is top notch. Only warning would be that on some shorter actions (especially rimfires) they leave very little room to adjust for eye relief between the rings - especially if your scope has a big blocky turret saddle.

Quote:

---

Originally Posted by J.Baker

Been a big fan of the DNZ products for years now. Very light weight mount setup and the quality is top notch. Only warning would be that on some shorter actions (especially rimfires) they leave very little room to adjust for eye relief between the rings - especially if your scope has a big blocky turret saddle.

---

Great inside information based on experience. Thank you.