Re: I have so much to learn!
Yep...bed it.
See the other bedding questions posed on the forum. There is some EXCELLENT pictures posted. (picture IS worth 1000 words!!)
Re: I have so much to learn!
I have learned this much....I will not be doing anything myself, I will have this done by a quality smith. Can someone tell me what piller bedding is and what it does? Is that gthe same thing as bedding the action?
Re: I have so much to learn!
Pillar bedding...basically...provides two points of contact for the action to rest on. Used to be THE standard. There is some situations where pillars are still needed, but a normal bedding job is sufficient in 99% of all applications. (IMHO!)
Some pics and info for you....
http://www.scorehi.com/pillar%20installation.htm
http://www.google.com/images?hl=en&q...w=1362&bih=652
Re: I have so much to learn!
Thanks!
So would I be better served having the action glass betted in my new B&C stock or should I buy the piller bedding system from SSS and have the action piller bedded and glass bedded?
Re: I have so much to learn!
B&C Medalist stock has a aluminum bedding block, does it not? In that case no pillars would be necessary.
Re: I have so much to learn!
In my opinion, pillars are not needed if you bed an action to the stock.
Re: I have so much to learn!
Thanks, that is what I needed to know
Re: I have so much to learn!
If I understand correctly the reason for pillar bedding is to keep the action screws from compressing the stock and becoming loose wood stocks get wet oil soaked etc and compress. The new synthetic , laminate , fiberglass, graphite etc don't have that problem but people still do it anyway bed that is . I am sure it doesn't hurt IMHO gunsmiths way over charge for bedding jobs to do a satisfactory job is not rocket science . I have been using a steel bed system and I like the way it works Fred
Re: I have so much to learn!
I am just scared I will screw something up if I attempt to do it myself. I saw in another post that someone was talking about skim bedding the recoil lug along with the action and I don't even know what a recoil lug is.
Re: I have so much to learn!
the metal tang that hangs down between the barral and action. it makes contact with the stock, so the screws do not have to keep the action from moving back during recoil. the screws just pull down and the recoil lug holds the action from sliding back in the stock. If there is an air gap between the stock and lug, the action will slide every time the trigger is pulled. bedding fills that space and insures full contact if the surfaces are not entirely parallel with each other it will insure full - even contact. not just one side.
Re: I have so much to learn!
Quote:
I love this site but after spending just a little time here it is clear to me that I do not know anything.
Patience Grasshopper, there is much to learn, but many here that are willing to teach.