Current best sources for bolt heads?

Printable View

05-11-2019, 09:13 AM
JeepsAndGuns

Current best sources for bolt heads?

So I have a 308 I will be soon changing over to 223. Naturally I will need a new bolt head. I have been searching around and so far am not coming up with much. So far the only places I have found that have them, are gunshack and PT&G. However, gunshack does not list the left handed bolt head for 223 (only 308, which is what I have), so really that only leaves me with PT&G.
The PT&G bolt heads seem nice, but they are a little pricey. Is this going to be the only game in town for what I need? (223 left hand bolt head)
05-11-2019, 09:40 AM
wbm

Numrich has them.

https://www.gunpartscorp.com/search#...t%20head%20223
05-11-2019, 07:00 PM
JeepsAndGuns

Quote:

Originally Posted by wbm

Numrich has them.

https://www.gunpartscorp.com/search#...t%20head%20223

Checked there before I posted this thread. They are out of stock. Midway and brownells are both out of stock as well.
05-11-2019, 08:40 PM
GaryB

Delete.
05-12-2019, 01:40 PM
mikeinco

i think the ptg is NOT a drop in part yes / no ?
05-12-2019, 02:25 PM
GaryB

Quote:

Originally Posted by mikeinco

i think the ptg is NOT a drop in part yes / no ?

The one I purchased seemed to be. I installed it as is and have not had any trouble with it since.
05-12-2019, 05:59 PM
JeepsAndGuns

Quote:

Originally Posted by mikeinco

i think the ptg is NOT a drop in part yes / no ?

It was my understanding that on a rifle with a barrel already installed and headspaced to the old bolt head, and all you do is swap in one of their bolt heads, headspace will most likely need to be adjusted.
However if you are doing a new build, where you install the bolt head, then install and headspace the barrel, all will be fine.
05-12-2019, 11:53 PM
Blackthorn

I use PT&G bolthead’s on all my builds. They make a really nice replacement. They are worth the money. I actually waited six months to get one without an ejector for my FTR build.
Couple of things to note. If you just use it as a replacement you still have to check both headspace and firing pin protrusion. If the headspace is not correct you’d have to pull the barrel and adjust the headspace. Since you are switching barrels this won’t be an issue. You will still need to check firing pin protrusion.
05-13-2019, 06:17 PM
charlie b

Doesn't anyone buy from EA Brown?
05-14-2019, 12:19 PM
JeepsAndGuns

Quote:

Originally Posted by charlie b

Doesn't anyone buy from EA Brown?

Never heard of them. After finding them with google, it appears they only offer a "conversion" where you send in your bolt and then I assume they swap out the bolt head to your desired caliber, then send it back with your old parts?
I do not need someone to swap the head for me, I just need the bolt head. Not gonna pay $75 for someone to install a factory bolt head, when I can buy a pt&g bolt head for $70.
05-21-2019, 02:45 PM
GaCop

Quote:

Originally Posted by charlie b

Doesn't anyone buy from EA Brown?

I've bought Choate Tactical stocks and sporter barrels from them. No issues, no drama.
05-27-2019, 07:02 AM
GaCop

Checking Numrich just a short while ago, they're showing new 223 bolt heads in stock, RH and LH.
05-28-2019, 12:27 PM
JeepsAndGuns

Quote:

Originally Posted by GaCop

Checking Numrich just a short while ago, they're showing new 223 bolt heads in stock, RH and LH.

Shows out of stock for me?
https://www.gunpartscorp.com/products/1401030A
05-28-2019, 02:19 PM
GaCop

Quote:

Originally Posted by JeepsAndGuns

Shows out of stock for me?
https://www.gunpartscorp.com/products/1401030A

You have to go to page three to see the new factory bolt heads
05-29-2019, 12:17 PM
JeepsAndGuns

Quote:

Originally Posted by GaCop

You have to go to page three to see the new factory bolt heads

Your going to have to post a link. I still do not see them. I even searched "savage bolt head 223 LH" to bring up every listing and the one I linked above is the only one. Product #: 1401030A
05-29-2019, 03:02 PM
Dave Hoback

I still think you should just pick up a PTG and be done with it. They are flat out a better part! Spend the couple extra bucks(not like it’s gonna break the bank over a stock bolt head), and I’m sure you won’t regret it. I haven’t read about anyone yet who does! PTG makes nicely machined products.
05-30-2019, 12:43 PM
JeepsAndGuns

Quote:

Originally Posted by Dave Hoback

I still think you should just pick up a PTG and be done with it. They are flat out a better part! Spend the couple extra bucks(not like it’s gonna break the bank over a stock bolt head), and I’m sure you won’t regret it. I haven’t read about anyone yet who does! PTG makes nicely machined products.

99% chance I will. But I am not against saving a little money if I can find a factory bolt head for half the price or less of the PTG head. The PTG bolt heads are really nice, but a factory head would serve the purpose just fine too. Just a factory head is proving to be harder to find than I was expecting.
I have until my new barrel comes in to find a head. So I am in no rush. If I have not found a factory head by the time my barrel gets here, I will order a PTG one.
05-30-2019, 04:20 PM
Dave Hoback

I’m baggin’ what you’re rakin’. Well, you could try calling Savage parts department directly, between 9am-4:15pm EST. 413-568-7001 Give em a sob story about getting this together for a disabled person with no arms or legs & only half a pancreas! And this is his dream rifle! Who knows....
05-31-2019, 10:39 AM
Texas10

Have you tried the obvious choice, contacting Savage Customer Service? They may want you to sign a waiver to ship that part to you, or just have it shipped to your gunsmith. If the C.S. person won't offer you the choice of signing a waiver, call back later and talk to another person, it seems to make a difference. It seems that some just don't want to do the extra work, but most will work with you. Just be nice and sprinkle your words with plenty of sweetness (it's good practice anyway) and you'll have a bolt head in your hands quickly. Be sure to tell them you're shooting a contest in two weeks, that'll often help to grease the rails.

Savage is by far the cheapest source of Savage parts, and you pretty much know they're in stock.
05-31-2019, 10:40 AM
Texas10

Quote:

Originally Posted by Dave Hoback

I’m baggin’ what you’re rakin’. Well, you could try calling Savage parts department directly, between 9am-4:15pm EST. 413-568-7001 Give em a sob story about getting this together for a disabled person with no arms or legs & only half a pancreas! And this is his dream rifle! Who knows....

Don't know how I missed your post, but I think you said it better!
06-01-2019, 08:24 AM
Dave Hoback

LOL..no worries my friend! I’ve said it a few times...not difficult to sometimes “hear an echo” in a thread. LOL! As Robin has said, “great minds think alike”.
06-01-2019, 06:54 PM
Robinhood

https://www.gunpartscorp.com/products/1349440E
06-01-2019, 07:06 PM
Robinhood

https://www.gunpartscorp.com/search#...%20bolt%20head
06-01-2019, 09:24 PM
Dave Hoback

The first one you showed was a RH Rob. There are many bolts listed on those pages, but if you look, it’s the same 4 or 5 Part Numbers listed over & over again! The correct bolt is Part #1401030A, and it’s Out of Stock. But this one is also a LH. https://www.gunpartscorp.com/products/1354530
And it’s showing in stock jeepsandguns. Grab one before they’re gone!
06-01-2019, 09:43 PM
Dave Hoback

Duh
06-02-2019, 11:53 AM
Robinhood

That is the first one(LH) I found. I went back and looked to make sure it was left hand and I missed were he said LH. Don't know how, anyway, I changed to the right hand. It is all how you query. I made an effort. The next post I linked to all of them in case I missed it.

I love having someone on the forum that will catch everyone's mistakes and rub their nose in it rather than just bring it to attention. You know throw gas on it and a bunch of shredded paper and wood to make the burn more intense. Everybody loves that. Well, almost everyone. Every once in a while is fun......
06-02-2019, 05:44 PM
Dave Hoback

Quote:

Originally Posted by Robinhood

That is the first one(LH) I found. I went back and looked to make sure it was left hand and I missed were he said LH. Don't know how, anyway, I changed to the right hand. It is all how you query. I made an effort. The next post I linked to all of them in case I missed it.

I love having someone on the forum that will catch everyone's mistakes and rub their nose in it rather than just bring it to attention. You know throw gas on it and a bunch of shredded paper and wood to make the burn more intense. Everybody loves that. Well, almost everyone. Every once in a while is fun......

Robin, I sincerely didn’t mean anything towards you. I knew it was simple a overlook, and was simply citing the correct one for the OP, as he asked for links. I’m actually surprised by your response. I’m truly sorry you misunderstood my intention. I thought it was clear to you how high a regard I think of your opinion. Sincerely, what you took from that was not in any way how I meant. Again I’m very sorry, but this is odd.
06-02-2019, 06:39 PM
Robinhood

Gotcha. Don't be a butt head.:p:peep:
06-03-2019, 07:10 AM
GaCop

Quote:

Originally Posted by JeepsAndGuns

Your going to have to post a link. I still do not see them. I even searched "savage bolt head 223 LH" to bring up every listing and the one I linked above is the only one. Product #: 1401030A

I don't know what's going on with their web site but now there's nothing......
06-03-2019, 12:52 PM
JeepsAndGuns

I sent a email to Lisa at sharp shooters supply. They said they have the left hand 223 bolt heads in stock.
I believe I am going to go ahead and send the action to them for a T&T and have them install/true the new 223 bolt head when they do it.
I was not originally not going to do it, but I love how smooth my other two actions are compared to this one and I just can not help myself. I talked myself into it.
Plans and budgets just never go as planned!

Thanks for all the help guys!