Painted the stock on my LRP....I'm happy with it.
http://i14.photobucket.com/albums/a3...pshobutm5e.jpg
http://i14.photobucket.com/albums/a3...psjwudvjeq.jpg
http://i14.photobucket.com/albums/a3...pshxinyi5e.jpg
Printable View
Painted the stock on my LRP....I'm happy with it.
http://i14.photobucket.com/albums/a3...pshobutm5e.jpg
http://i14.photobucket.com/albums/a3...psjwudvjeq.jpg
http://i14.photobucket.com/albums/a3...pshxinyi5e.jpg
Heckuva job! You do good work. Very nice.
Looks good! What method and product(s) did you use?
Nice ...paint!
I like it
Outstanding !!!!!!!!!!!!!!
Oh, that's nice. How much time is invested in that job?
Very well done..
Looks like a rattle can/sponge job. Well done.
Thanks for the kind words guys....used my airbrush to spray the gray and sponge for the white.....took only a few hours to do.
Nice job. I like the colors you used. An unrelated question though since I see you have that scope back as far as it will go: Did it wind up in a comfortable position for you or is the LOP of that stock still a little long for comfort? The reason I ask is because I see so many scopes mounted the same way, and I've seen so many conversations about shortening stocks, sometimes I wonder why manufacturers just keep making them longer?
That came out looking nice! Well done!
I tried the sponge over airbrush look when I was trying to duplicate Multicam. Seeing yours, I think I went to heavy with the sponges.
Looking good, well done Sir. Shoot and shoot more often.
WOW That is Very Very nice. I think you did a Great job.
...
THAT sir is a great-looking stock - it really pops!
Excellent paint job... looks great!
For your cheek weld, try one of these:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
If it's still too low, take pipe insulation, cut it to length, then slit it lengthwise and build up underneath. Great (cheap) way to take care of the issue. The insulation will eventually compress, so you may need to insert an additional piece, but once settled, it works great.
http://www.savageshooters.com/attach...0&d=1515255592
I tried several of the different "stock packs" and temporary cheek risers and none of the ones I tried were consistent and they shifted and moved around between shots. I really struggled wasted a lot of moneyand did the dance trying not to drill the stock. When nothing worked as I wanted I finally bought a couple of 12"x12"sheets of kydex online, some knobs and bolts at the hardware store and made a "Karsten" style adjustable cheekrest very similar to what comes on the long range hunter models. It was well under $20 for everything I needed to do a couple of them. There are tons of how to videos and articles online and kydex is really easy to work with. Also it can be painted to match your current paint scheme and it will look factory. Here's one I did on a lefty and I have been very happy with it. Of course Karsten also sells a kit ready to install. A very easy and worthwhile project. As far as the Beartooth products I dont have one of their risers but do have one of their slip on recoil pads that I have used for the last 14 years and I like it a lot. A very good product that has stood the test of time. (unlike my limbsavers that have melted)
Attachment 4343
I have the triad tactical stock pack on my
h-s. It is a great fit. It has never moved at all. https://uploads.tapatalk-cdn.com/201...30320f30e7.jpg
Sent from my iPhone using Tapatalk
According to an article I googled it is indeed hollow in the buttstock area and easy enough to drill for the installation of an adjustable cheek piece.
Just to be extra sure I'd probably give HS Precision a call and discuss your plans with them. Manufacturers are usually very helpful to their customers on things like this and may even offer up some additional how to or tips on the best way to do it. I think it would be very functional for you and would look good too when painted to match.
Good luck BHJ
HS used to have an aluminum pipe inside the pistol grip to keep it from snapping in 2 there. Not sure if they still do and if so how far into the butt it goes.
That stinks,
As much as HS precision thinks their stocks are worth,
A fella would at least think they would give decent customer service and answer a straight forward question about installing a cheek riser on one of their stocks.
Though I am not very likely to run out and buy one of their stocks because of their cost vs the competition, Stuff like this lets me know where to spend my money should I need a higher end stock in the future.
Did you tell em you painted it? They'll probably tell you that voids the warranty too.
Someone here recommended the Bradley Adjustable Cheek Rest so I picked one up for $110, works great and it stays on well. I was going to go the drill way and get a kydex riser but after fubaring the forearm while drilling to put on a rail for the bipod, I didn't want to go through the same thing twice. When I drilled under the forearm, there was this powder stuff and it felt like it was going to fall apart so I jammed the screw in there and left it. I have to go back and fix that because I like this stock a lot.