Question about putting an AccuStock back on

Printable View

08-26-2010, 12:36 AM
justeric

Question about putting an AccuStock back on

Below are part of the directions on how to put the AccuStock back on the action. Step 3 says to Tighten the forward most screen to 10 pounds. Is the forward most screw the Accu Wedge screw?

3. Tighten the forward most screw to 10 in.-lbs. to seat the action against the aluminum rail boss, then back out one-half turn.

4. Tighten the middle action screw to 10 in.-lbs.

5. Tighten the rear action screw to 10 in.-lbs.

6. Tighten the forward action screw to 10 in.-lbs
08-26-2010, 05:17 PM
bodywerks

Re: Question about putting an AccuStock back on

Yes.
08-27-2010, 12:40 AM
justeric

Re: Question about putting an AccuStock back on

Thanks for the information!

All times are GMT -4. The time now is 02:38 AM.

Savage Shooters is in no way affiliated with or endorsed by Savage Arms.

The sole purpose of this site is to provide an online community for those who wish to interact with other Savage firearm enthusiasts.
The information and opinions expressed within this site are those of its contributors, and in no way should be viewed as the opinions or recommendations of Savage Arms.

This site utilizes affiliate programs to generate revenue and as such purchasing a product reached by clicking on a link on this site may earn us a small commission on that sale.