What is the size of the ejector retaining pin hole. I think they should all be the same. But specifically for a 223. To much headspacing has roughened the interior of the hole.
Thank you
Marlin
Printable View
What is the size of the ejector retaining pin hole. I think they should all be the same. But specifically for a 223. To much headspacing has roughened the interior of the hole.
Thank you
Marlin
I have a spare ejector retaining pin a can measure if that helps
Deleted: bad advice.
The retaining pin hole is .063". The ejector hole is .103", plus or minus .001".
Thanks Fred. I glazed over that one. I do use a 1/16th pin punch on the retainer pin.
Thank you Sharpshooter. Now i an order a reamer to clean up the hole.