Need help! Rookie mistake

Ok so I'm in the process of doing my first build. I ordered a 111 Xp 300 mag, criterion barrel, and a gamescout McMillan stock. Ok where I went wrong is ordering my stock to find out it is inletted for a savage 110 bottom bolt release dbm. Little did I know the 111 has a way crappier dbm than the 110 so now I have an expensive stock that I need bottom metal for. I have looked at cdi but I was wondering if I can order a factory bottom metal and mag which is what the stock was inletted for? Below is a picture of the bottom of my stock. Thanks for yalls help!http://uploads.tapatalk-cdn.com/2016...8fc84a7fae.jpg


Sent from my iPhone using Tapatalk

http://uploads.tapatalk-cdn.com/2016...7edc64601e.jpg
This is the stock off the 111 Xp that I bought which is a totally different dbm system.


Sent from my iPhone using Tapatalk

Send it back? Usually they will take it if no work done on it. Last stock I bought they flat said to if not right.

I know exactly what you're talking about.

The new stocks don't even have a bottom metal, just a axis style magazine that latches directly to the stock.

Answer is YES. you can order a long action factory bottom metal and magazine to fit in the McMill stock.

If you want you can also order a aftermarket aics compatible bottom metal and use aics style mags.

The answer is yes, you can order bottom metal direct from savage, but I believe that the last time I ordered parts they wanted a serial number off the rifle. In your case, your 111 serial number won't jive with the type of bottom metal you want. But I believe if you find the right part number for the bottom metal you want, and call them direct, they will sell it to you.

Quote:

---

Originally Posted by Zero333

I know exactly what you're talking about.

The new stocks don't even have a bottom metal, just a axis style magazine that latches directly to the stock.

Answer is YES. you can order a long action factory bottom metal and magazine to fit in the McMill stock.

If you want you can also order a aftermarket aics compatible bottom metal and use aics style mags.

---

Are the aftermarket bottom metals drop in or do they require some grinding to fit?


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by bodywerks

The answer is yes, you can order bottom metal direct from savage, but I believe that the last time I ordered parts they wanted a serial number off the rifle. In your case, your 111 serial number won't jive with the type of bottom metal you want. But I believe if you find the right part number for the bottom metal you want, and call them direct, they will sell it to you.

---

Where would a person go to find a part number for a bottom bolt release long action dbm?


Sent from my iPhone using Tapatalk

http://www.savageshooters.com/conten...Parts-Tutorial