Bolt part # comparison, 12 Target action, .223 to Std, LH
Hey everyone, thought i would share some in formation i found in doing some research. I am changing my 12 LRPV from .223 to 6.5CM. As the helpful people here pointed out his comes with some bolt changes. i was looking for the all the parts that were different and came up with the below list (these are for stainless parts, not blued) (and a LH port). hope this helps someone else in my shoes down the line
Disclaimer: verify with savage before taking my word on the part numbers!
Name |
Diagram Number |
Part Number .223 |
Part Number Std |
Firing Pin Assembly |
11 |
> |
107348 |
Cocking Piece |
11B |
> |
107345 |
Cocking Piece Lock Washer |
11C |
> |
103494 |
Main Spring |
11D |
> |
104279 |
Washer Firing Pin Stop Nut |
11E |
> |
100303 |
Firing Pin Stop Nut |
11F |
> |
107344 |
Firing Pin Short Magnum |
11G |
> |
107343 |
Bolt Assembly |
12 |
108392 |
108393 |
Cocking Piece Pin |
12A |
> |
107346 |
Rear Baffle |
12B |
> |
106164 |
Target Bolt Handle |
12C |
> |
108189 |
Cocking Piece Sleeve |
12D |
> |
107347 |
Bolt Body |
12G |
> |
107480 |
Bolt Retaining Pin |
12H |
> |
103978 |
Front Baffle Washer |
12I |
> |
100293 |
Front Baffle |
12J |
103321 |
103322 |
Bolt Head, LH, Ground |
12K |
107481 |
107482 |
Extractor |
12L |
102278 |
100139 |
Extractor Spring |
12M |
> |
100257 |
Extractor Ball |
12N |
> |
100214 |
Ejector |
12O |
> |
100129 |
Ejector Spring |
12P |
103611 |
100131 |
Ejector Retaining pin |
12Q |
> |
100130 |
Bolt Assembly Screw S.S. |
12S |
> |
102522 |
|
|
|
|
I did not see this posted anywhere else, sorry if this has already been posted.