Burris XTR Rings (420210 Part #) 1 inch tall 34MM Rings. The scope objective is 50MM.
Printable View
Anyone Chronographed the Hornady ELD-M 140gr Match factory ammo out of a 24" Stealth barrel?
I can't reconcile my personal experience (+0.3 Mil) at 200 yards with the Ballistics AE app (+0.4 Mil) after reviewing all the inputs. I can get it to align if I put the bullet speed at 2800 FPS but the box indicates 2710 FPS. I'm using the G7 BC of .326 which I understand is appropriate for longer boat tailed bullets.
Thank you very much Sir.
First of all, this SS scopes were tested and qualified for Navy Seals, they are still on the list, meaning company must to hold everything the way it was qualified. If this is good for Navy Seals, it is definitely good for me!
I have similar scope (12X42 Mil-Quad) on my Tikka T3 Hunter 7mm Rem Mag (I am not hunting, I use that rifle for long range), it is serving me very well. It is very clear glass, reticle is very clear and sharp. I spoke with a lot of people and everybody recommend me 10 or 12 power for 1000 yards. Probably I will end up buying 16X and will see if it will give me more on beyond 1000 yards. Unfortunately I didn't use Stealth on long range yet, planning to go 600 yards next weekend and it is still will be gong, no target. In our area 1000 yards range is very rare, only in private clubs. I am looking for access for one.
I use the pro version. Found bc on 338 Hornady 285 ELD was off. Think there was one on 308 to but been awhile. Need to write this stuff down so I can send in the info.
Bhowell - what app is that, is it Android or Apple. Looks like a neat product.
Just measured LOP and it came up 13 and 5/8". There is no way to make it shorter. But XLR is offering shorter tube to compensate length of FU. In my case-I don't need it, I am right on the money with this LOP
Here is pic how FU looks now. In my opinion it is much cleaner then with castle nut.
[IMG]http://i563.photobucket.com/albums/s...ps99bzx3rt.jpg[/IMG]
Nope. First of all, there are 7and half revolution left on the pipe, so I screw her in all the way, tightened with belt wrench, and then on the bottom, I drilled/taped hole 6-48 and put screw.
[IMG]http://i563.photobucket.com/albums/s...psf2v5llgk.jpg[/IMG]
Another source currently on sale: http://www.primaryarms.com/search?keywords=MAG579-BLK
Thank you Sir.
Here is another teaser. New bolt handle. I modified couple of weeks ago stock "ball", but didn't like, too bulky. This time I made it much slimmer. Material for handle is ULTEM 2300, 30% Glass filled.
[IMG]http://i563.photobucket.com/albums/s...pswgpqdymf.jpg[/IMG]
[IMG]http://i563.photobucket.com/albums/s...pszwsqtbmo.jpg[/IMG]
[IMG]http://i563.photobucket.com/albums/s...pshoko5ezh.jpg[/IMG]
[IMG]http://i563.photobucket.com/albums/s...psqwzvp7b0.jpg[/IMG]
Ok I'm thinking about a stealth in 6.5 now does this have the target accutrigger or just a standard accutrigger?
Thank you, drybean that helps a lot. Now that I know that my barrel is a true 24"I can focus on other parts for her.