Axis action in 243 rebarrelled to 6.8SPC
Barrel by Apache
MDT LSS chassis
Leo 3,5-10X glass
Modified MDT 223 mag
Printable View
Axis action in 243 rebarrelled to 6.8SPC
Barrel by Apache
MDT LSS chassis
Leo 3,5-10X glass
Modified MDT 223 mag
Very sharp looking rig!!
Nice! What's your barrel length, and is that an Accutrigger in there?
I would like to try a chassis on one of my Axises. It'd be nice if MDT got around to offering an HS3 for the Axis, but there probably isn't enough interest.
barrel is 18"Quote:
Originally Posted by DrThunder88
I used an Axis ll for the build.
Trigger is right at 3#
Nice... How does it shoot?
So far only did sight-in with Federal factory ammo, mainly because it was cheap. Didn't want to waste high dollar bullets on sight-inQuote:
Originally Posted by hrdstmax
The Fed ammo gave sub MOA. Hand loads will probably give improved results, but with only 10X max magnification, I don't expect too much.
Minute of deer/hog has already been achieved.and that was all I cared to get.
now I am thinking I need this instead of waiting on the HS3. did you use a larger recoil lug? and if so what the pn or who makes them. thanks
The chassis is cut for the use of the Axis lugQuote:
Originally Posted by Styledogg
Here is my Axis .308 on a LSS chassis
http://i1226.photobucket.com/albums/...psyqi43cd0.jpg
Before paint job
http://i1226.photobucket.com/albums/...psyou4b6ff.jpg
seems weird that this thread woul be moved to this forum rather than the "build" forum.
Never would have thought of looking for it here.
moderatorsQuote:
Originally Posted by needagun
please explain what justifies moving this thread to this topic.
the emphasis was the build not the stock.
once moved it totally died