Printable View
I was wondering how much inletting is needed to put a CDI DBM in a choate tactical stock for a savage 10 with factory dbm with the bottom bolt release?
I live in Canada and therefore cannot send my stock to US to be inletted by Jeff at CDI, so I am just curious if anyone has any experience with it?
I have heard the the CDI DBM is a direct drop in for the savage 10 with factory dbm?
Any help would be greatly appreciated!
I would sell the stock you have and order a new one from CDI with the inletting completed. They're work is top notch. I run their bottom metal on a 116 Stagger feed using the 300WM type Aics mag in a Choate Stock and a M10 in a Manners T2A with the 308 Type AICS mags.
The only problem is in Canada I have to have everything imported, which in turn costs a lot more money for import/export fees on top of the product, plus its a left handed model
The CDI bottom metal is similar to the PTG bottom metal.
To get the PTG into My Choat tactical I had to remove the step on the Choat inlet to the flat accustock profile and relieve the mag opening a bit.
Did it with a dremel and a mill type bit in about 10 minutes.
If your somewhat handy with tools and take your time it won't be bad at all.
You Canadians are usually pretty handy.
Perfect thank you!