-
Bolt heads and baffles
So, I screwed up my new build and discovered a 243 WSSM will not feed in a WSM stagger feed action. Did not know that. lol
Anyway, I am going to change to a 260 Rem barrel. When I change the bolt head, is the same wsm baffle going to work? I know I will have to remove the standing ejector.
Also, any way to use hte wsm magazine or do I need to find a 308 mag?
-
As long as the front baffle is one length and no long leg on the right hand side you are ok. You will need a .308 type staggerfeed mag as the wsm is too wide fir this type of cartridge.
-
Also remember to change out your firing pin. The factory WSM heads are thicker and thus use a longer firing pin. If you switch to a 308 sized head you will need a standard firing pin.
-