Rimfire Savage Striker no shim trigger job

I was about to perform the " Shim" fix on my rimfire savage striker. I took the trigger group out. I stoned the sear face and lever contact surfaces, then I started looking at the engagement spring.

I had a AR15 LPG kit in my smithing tackle box, and realized the bolt catch spring was the same diamiter but shorter.

I put it in. Took the travel take up screw all the way down to the keeper bolt, and reassembled.

Perfect 3.2 lb trigger with no shim.

Try it.

Cool!

Ill post pics of the 100m five shot groups this weekend.

Success!!!

http://i1201.photobucket.com/albums/...emporary-7.jpg

http://i1201.photobucket.com/albums/...4689924852.jpg

http://i1201.photobucket.com/albums/...8D682AA267.jpg

http://i1201.photobucket.com/albums/...CF4B0FDD29.jpg

Last two fast

http://i1201.photobucket.com/albums/...0133669C21.jpg

All fired at 100m. 5mph wind R-L. 40 Gr Winchester super x .22 WMR. 7.5 inch barrel. 10x magnification on the scope.

Triangles are 1 inch.

What it was before the trigger job- fliers were hard to avoid:

2 inch hivis-

http://i1201.photobucket.com/albums/...mporary-18.jpg

Very nice!