Just got a modified case for my Hornady OAL gauge off ebay for the 6.5x55. All the other ones I have are Hornady headstamped,this one is stamped PPU. Are these the same case or did somebody pull a fast one?
Printable View
Just got a modified case for my Hornady OAL gauge off ebay for the 6.5x55. All the other ones I have are Hornady headstamped,this one is stamped PPU. Are these the same case or did somebody pull a fast one?
PPU is Privi
I'm thinking Hornady doesn't load the swede so they buy the brass elsewhere?
It was in the regular Hornady packaging,that's what confused me.
Then I'd say post #4 holds the answer.
Either way as long as it is threaded properly and the neck opened up a little so the bullet will slide with slight resistance it will work. I make my own on a $35 drill press. Just need the right drill bit, tap and neck expander. I highly suspect a lot of them on ebay are homemade. Especially the hard to fine ones.
Floyd