extractor problem

i have a mod. 12 lrpv,,right bolt ,left port..while extracting as soon as the neck clears the chamber the extractor lets go and the brass just lays in the action..not a big deal at the range but i also use it for stand hunting..
[6mm. br] and thus no 2nd shot if needed..[should have said as soon as neck clears and the brass tilts it lets go]has anyone had this problem,,appreciate any solution you may have,,Rich

I'd start by swapping the extractor with one that's known to work properly. Yours wouldn't be the first to have an extractor cause ejection issues.

Sharp Shooter Supply extractor ejector kit works for me.

install a .140 extractor detent ball
if you need a couple send me your address

drybean