Is there any issue with shooting this stuff?
Printable View
Is there any issue with shooting this stuff?
Not one bit... it still has a full copper jacket on it, the steel core has zero effect on barrel wear.
I guess I had better get some then. Thanks. Palmetto has a really good deal on AE 55gr and 62 gr.
What's your barrel twist, that's going to be your only concern. 62gr stabilize best with a faster twist such as 1/7 which is why the military M4's and newer M16's all have 1/7 twist barrels to utilize the 62gr bullets. If you have a slower twist such as a 1/12 you'll want to stick with a lighter bullet around 40gr.
Edit: if you have the 1/9 you'll be better off sticking to 55gr for better grouping, but only experimenting will tell you for sure with your particular rifle.
1/9 in my Savage.
The 1:9 should work very well. Some members here have had good luck with bullets as heavy as 75grs in 9 twist barrels. A 62gr should work fine, but each barrel is different so try it and see but I would be willing to bet it will be just fine.
Isn't the Savage M-12 chambered in .223 as opposed to 5.56?
Yes, but I'm not going to worry about it.Quote:
Originally Posted by SavageRifle
In a bolt gun it's not an issue as it is with semiautos. The issue is with case extraction in semiautos due to the higher pressures which is why Military rifles have chrome line chambers to help with extraction.
Shot several hundred of these in my AR and Bolt action Savage....no problems.