Just picked up a used F/TR for my son. He's going to need a cheek rest.
What kind are best and people using on this rifle?
Printable View
Just picked up a used F/TR for my son. He's going to need a cheek rest.
What kind are best and people using on this rifle?
Depends on what you want. Could build one up with foam and wrap. Look at the Choate fixed cheek rests or go adjustable if you're willing to do some fitting or drilling into the stock for installation. Install is not hard, but if you do not want to damage the stock at all a wrap is best.
I use the Karsten Custom Works rest, test fit for were you need it drill two 1/4 inch holes and done and done.
Ran a karsten on my Axis in the ProHunter stock previously :
http://i1281.photobucket.com/albums/...psd6c3aae2.jpg
Sent from my HTCEVOV4G using Tapatalk 2
I tried a couple of the stock packs to bring up the comb on a rifle I had mounted a picatinny rail and a 50MM scope on. Tried the lace on and also one from Voodoo tactical with velcro straps. I didn't like either of them. Sloppy fit, slide around and just not stable in my opinion. I built one of my own similar to a karstens style from a Kydex sheet I bought online and some knobs and bolts from Ace hardware. After watching about 2 dozen videos and reading several articles on How To (wanted to get a good cross reference) I gave it a try. I took my time measured everything twice and cut and drill once. The worst part of the whole thing was the emotion of drilling holes in my stock.I was scared even though I knew some epoxy, a little sanding and paint would fix up nearly anything I could do to a factory synthetic. Man I'm glad I did it. Total cost for enough Kydex, knobs and bolts to do 3 was about $20. I really like my kydex cheek rests. Very solid and repeatable unlike the stock packs and now my eye is centered as soon as I shoulder my rifle. very stable and easy to shoot with.
Where did you get your hardware BHJ?