A Way to Get a Wooden Axis Stock Target Stock
I was checking out Youtube, and came across a post of someone who had used an Axis rifle to build a competition rifle. He modified it from a 30.06 to a 6mm TCU, (necked-up .223 brass to .243), and was shooting < 1" groups @ 300 yards, and at 100 yards, could cover with a dime. He used a BSA CF2 stock, and modified it for the Axis action. I purchased one of these stocks, and almost have the action installed. It was a pretty close fit to start with. I'll have to change the mounting holes from 5" to the 4.8", and will probably do it with offset pillar blocks.
Here's the link: http://www.youtube.com/watch?v=brcEm6RE9kM
Gary
My Version of "A Way to Get a Wooden Axis Stock Target Stock"
savagebuilder is this what you were looking for?
Sorry the pics aren't very good, used my cell phone....
NOTE: All finished pictures are of my 25-06 and the raw pic's are a work in progress
Raw Left Side Shows how rough they might ship to you
http://www.nettally.com/kwd/Savage/1LeftSide.JPG
Raw Left Side
http://www.nettally.com/kwd/Savage/2LeftSide.JPG
Raw Left Side Butt again Shows how rough they might ship to you
http://www.nettally.com/kwd/Savage/2LeftSideButt.JPG
Raw Inlet area showing Wood Plugs I have installed
http://www.nettally.com/kwd/Savage/BareStock1.JPG
Raw Inlet area
http://www.nettally.com/kwd/Savage/BareStock3.JPG
Bedding - NO - Pillers
http://www.nettally.com/kwd/Savage/BeddingNOPillers.JPG
Finished - WITH - Pillers
http://www.nettally.com/kwd/Savage/FinishedPillers.JPG
Finished Bottom - they do have a NICE palm swell on them
http://www.nettally.com/kwd/Savage/FinishedBottom2.JPG
Finished Bottom
http://www.nettally.com/kwd/Savage/FinishedBottom.JPG
Finished Right Side Can't really see it, but they do have a NICE palm swell on them
http://www.nettally.com/kwd/Savage/F...dRightSide.JPG
They do shoot well also...If I could do my job!!!
25-06 3 shot groups:
http://www.nettally.com/kwd/Savage/25-06a.JPG
http://www.nettally.com/kwd/Savage/25-06b.JPG
...