Paint chaote sniper stock ?

I am waiting for my sav 12 bvss 308,, expect it in a few days.... would like to buy a chaote sniper stock bug dont like the color ... has anyone panted one and if so what kind of paint did you use and what was the procedure?.. of course when cleaning gun would hate for the paint to come off lol..... please reply guys Oh forgot to tell you ,,I am a newbie

I have not painted a Choate stock but for any other I use the Testors Model Master sprays at the hobby store. The clear coat it with the Model mater flat (lusterless). Model paint does a very good job bonding to plastics and synthetics.

I've used Krylon Camo for a lot of stocks...and I believe they now make a Camo line for plastics...

Krylon for plastics. As with all paint, prep is the key. Sand to 320 and clean with alcohol or fingernail poilsh remover (acetone) and get to it degreased. Finish in clear for gloss, flat for dull.

Easy, follow label instructions.

Larry
Tinkerer

Thanks looked up Krylon on internet and they do make one for plastic called Fusion looks good ,,just wonder will it be a flat black

As long as it's "Camo", it should be flat- all the Camo paints are.
Toughest part sometimes is finding a matte clear coat- put as many thin coats of this on as you can stand- it helps protect the finish.

You can lay down any color of the fusion as a base. That will stick to the plastic better. Then use any color/ kind of spray paint you want.

I have used the fusion black camo and the krylon black camo and both are very flat. I usually apply some clear coats of krylon clear satin after to help protect it and use some steel wool to further flatten or dull up the clear coat.

thanks for info....testors should have a flat clear coat

The Testors dull coat is very flat.

Biggest thing when painting anything plastic is to make sure you clean it thoroughly to remove any residual hand oils and more importantly - any residual mold release agent that may be on it as paint will not adhere to either.