Savage 110 Date of Manufacture

I just picked up a new to me gun to add to a growing collection. Maybe growing to much. This gun has be sitting for at least 4 years in a case at my local True Value. I wanted then and when I happen to go there today and it was still there I would not leave with out it. The reason it properly never found a home is because its for lefties like me. Any left hand gun I come across I try my best to get. Ok back to why I am posting here. The model number is 110L-H in 7MM REM MAG and the serial number doesnt start with any letter so I guess its older than 1968. The serial number on the bolt and barrel is 131057 any ideals when this Savage was born.

Can't help on the specific date, but would ask that in the future you start your own thread rather than hijack someone elses. I've split your post to it's on thread for that reason.

Quote:

---

Originally Posted by MrFurious

Can't help on the specific date, but would ask that in the future you start your own thread rather than hijack someone elses. I've split your post to it's on thread for that reason.

---

Sorry Man.

[IMG]http://i631.photobucket.com/albums/u...ps1e30c43d.jpg[/IMG]

[IMG]http://i631.photobucket.com/albums/u...ps319d4b9f.jpg[/IMG][IMG]

http://i631.photobucket.com/albums/u...ps517e7c1d.jpg[/IMG]

[IMG]http://i631.photobucket.com/albums/u...ps4953f137.jpg[/IMG]

[IMG]http://i631.photobucket.com/albums/u...ps2b2bcaf4.jpg[/IMG][IMG]

http://i631.photobucket.com/albums/u...psafc82de3.jpg[/IMG]

I have found out that it is pre 1968 due to no letter at the beging of the serial # but what year before 1968?
I know its a left hand. I am a lefty. But what does the H stand for in the model #? And why is the serial # etched in on the bolt? Its a beautful gun in really good condition. I will post better pics sometime today.

Here is more pics of my new favorite gun (besides my Savage .17). The barrel length is 24" and the stock is solid wood. Also there is no plastic anywhere like on my left handed 700BDL deluxe classic pictured below. If this gun was born sometime before 1968 it didn't get used much. And if it is that old you know there wasn't many left handed models made. This gun was definitely worth what I traded it for. It deserves a nice Leupold scope for sure. Then I am going to find out what year this thing was made and what the H means in it model # 110L-H if it take year to finally find out. Maybe these pics will help someone figure it out. :nevreness:

I heard people say Savage guns are ugly. I believe the pics below show other wise. Anyone else on this forum have one similar to mine?

[IMG]http://i631.photobucket.com/albums/u...psa33406cf.jpg[/IMG]

[IMG]http://i631.photobucket.com/albums/u...psdf1123e8.jpg[/IMG]

Look how clean the internals are.

[IMG]http://i631.photobucket.com/albums/u...pse4c9e9d0.jpg[/IMG]

[IMG]http://i631.photobucket.com/albums/u...psaa50aa88.jpg[/IMG]

[IMG]http://i631.photobucket.com/albums/u...ps21117399.jpg[/IMG]

[IMG]http://i631.photobucket.com/albums/u...ps710afc38.jpg[/IMG]

[IMG]http://i631.photobucket.com/albums/u...psf1369ace.jpg[/IMG]

Here is a pic of one of my more modern rifle. Its a Rem 30-06. Its beautiful but It uses plastic heavily.

[IMG]http://i631.photobucket.com/albums/u...psd7c3ea36.jpg[/IMG]

No idea why the bolt is etched, bubba maybe, not factory though.

It is a 1968, I think.

I've been collecting dating info on the old 110's for a long time, yours is the highest serial number in my records yet.

The previous number is 129XXX made in 1968 so I'd hazard a guess yours is as well because in 1969 they went to the A series serial numbers (start with a letter).

See if you can find a small oval stamped on the barrel, this is a date code. I'll take a crazy guess and say yours has 6V stamped inside the oval.

Actually, don't bother looking, I just saw it in the top picture, looks like 6V to me but it's kind of struck lightly.

Definitely a 1968.

Quote:

---

Originally Posted by Mad Dog

Actually, don't bother looking, I just saw it in the top picture, looks like 6V to me but it's kind of struck lightly.

Definitely a 1968.

---

Your right it has a 6V. But what does the H stand for in the model #

More pics. Clean for a 68

[IMG]http://i631.photobucket.com/albums/u...ps1958d390.jpg[/IMG]
[IMG]http://i631.photobucket.com/albums/u...psdf1123e8.jpg[/IMG]
[IMG]http://i631.photobucket.com/albums/u...pse4c9e9d0.jpg[/IMG]
[IMG]http://i631.photobucket.com/albums/u...psaa50aa88.jpg[/IMG]
[IMG]http://i631.photobucket.com/albums/u...ps21117399.jpg[/IMG]

No idea what the H stands for, according to the 1968 catalog, what you have there is a model 110 MCL.

Just a guess, but maybe Series H? The rifle looks almost identical to my 110CL except for the rear elevation bar. My rifle has a Lyman flip up rear sight. Mine was built in the early 1970s.

Joe's your man on dating and model identification. Not sure why you edited this thread and turned it into a poll - no need for that so I closed it.

Since it was obviously a factory defect by being made BACKWARDS and it's old, I'd take it off your hands for a couple hundred bucks or so. ;)

Quote:

---

Originally Posted by kelbro

Since it was obviously a factory defect by being made BACKWARDS and it's old, I'd take it off your hands for a couple hundred bucks or so. ;)

---

Never getting rid of this one. It's a keeper.

Quote:

---

Originally Posted by Mad Dog

No idea what the H stands for, according to the 1968 catalog, what you have there is a model 110 MCL.

---

What does MCL stand for? Also could the H stand for the series?

M = Magnum
C = Detachable (clip) Magazine
L = Left Hand

Quote:

---

Originally Posted by MrFurious

M = Magnum
C = Detachable (clip) Magazine
L = Left Hand

---

Mine has no removable clip. There's only a steel plate being held on with 2 screws.

I'll post pics soon

Here's the 110 page from the 1968 catalog along with all the spec's for the different models.

http://img.photobucket.com/albums/v6...10_catalog.jpg

If the stock is original it's either a 110ML or 110MCL. Given the stock is for a blind magazine I'd be inclined to say it's a 110ML, but looking at the photo's of the magazine box shows what appears to be a detachable magazine surround and box with all the release hardware in place. This schematic from Numrick's isn't much help either as it shows all three magazine variations in one schematic but doesn't specify what parts were unique to what model.

http://www.gunpartscorp.com/pub/sche...DE,H_schem.jpg

After looking at the pics closely I don't believe magnum models came with clips. I think the one pic of the 110-MCL was a misprint. If you look at the 110-MCL it doesn't have a 24" barrel or a recoil pad that all magnum models came with. Also M models hold one less round than a 110-C. From what I see in the pics I don't think a 110-MC or 110-MCL existed. Does anyone on here have a magnum model with a removable clip? I do think I am a very proud owner of a 110-ML. Now the only thing left to figure out is what the H stands for in 110L-H. Why didn't Savage stamp the barrels like the catalog has it?

If anyone can can explain the H in 110L-H I will become a 3 year paid member instead of a one year and pay a one year membership for the person that comes up with the answer.

This isn't that difficult - they were offered both ways (110M = blind mag; 110MC = Detachable mag). Look at the specifications and pictures on the page I scanned and posted. The 110ML clearly has a longer barrel than the pictured 110MCL. The 110ML has features a rubber recoil pad compared to the 110MCL's aluminum butt plate. They're both details visible in the photos, they're both features specified in the specifications - what don't you get?

Now...the reason I questioned whether or not your rifle started life as an MC is because of the photo's of your magazine box. Look at the pictures in the link below, they show what a blind magazine box of that era is supposed to look like (the 110PE's were offered from 1966-1969). Notice the absence of the button release mechanism hardware on the right side. Notice the absence of the release spring on the left side.

http://www.gunbroker.com/Auction/Vie...Item=325631112

All and all I think it's a 110ML. What the H stands for no one likely knows - maybe the L-H stood for Left-Hand, which is about the only logical explanation. If it were a "Series H" it would look like this:

http://i102.photobucket.com/albums/m...d/IMG_0339.jpg

My bad, I always thought on the older 110's that MCL stood for monte carlo lefty.

I didn't think they had removable mags back in 68.

The detachable magazine setup was designed by Bob Greenleaf and was introduced to the 110 line in 1966 - it was his second engineering project after starting at Savage in 1962. His first assignment was to develop the detachable magazine setup for your beloved 99's which was introduced in 1964.

Digging into it a little deeper in my catalogs I see I was wrong in stating that the MC was a detachable magazine model. The typical Savage alphabet soup got me when it comes to their model designations and what letters mean what. Apparently in 1968 for the one model (the 110C) the C stands for detachable magazine, but it stands for who knows what on the MC models. I would assume this is why they dropped the 110M and 110MC models for 1969 and replaced them with the Model 110D which is for all intensive purposes the exact same model, but without the letter designation confusion. Just like they do today, they clearly used to change the letter meanings at will back in the day. I will still hold to and insist that MC never stood for Monte Carlo though - at least not in the 110 series, as even the basic "C" and "E" models featured a Monte Carlo stock.

The 1965 catalog lists the following models:

110 "Premier Grade" (P and PL) - French Walnut Monte Carlo with Rollover stock, standard blind magazine, available in .243, 30-06 and 7mm Rem Mag
110 Presentation Grade (PE and PEL) - French Walnut Monte Carlo with Rollover stock, standard blind magazine, nickel plated and engraved, available in .243 Win, .30-06 and 7mm Rem Mag
110MC - Select walnut Monte Carlo stock with checkering, standard bline magazine, available in .243, .308, .270, and 30-06
110 "Magnum" - Select walnut Monte Carlo stock with checkering, standard blind magazine, available in 7m Rem Mag, .264 Win Mag, .300 Win Mag and .338 Win Mag
110 "Economy" (E) - Monte Carlo stock with no checkering, standard blind magazine, available in 7mm Rem Mag, .30-06, and .243 Win
110MCL - Left hand, select walnut Monte Carlo stock with checkering, standard blind magazine, available in .243, .308, .270 and .30-06
110L Magnum - Left hand, select walnut Monte Carlo stock with checkering, standard blind magazine, available in 7mm Rem Mag, .264 Win Mag, .300 Win Mag and .338 Win Mag


Now look at the 1966 catalog which lists the following models:

110 "Premier Grade" (P and PL) - French Walnut Monte Carlo with Rollover stock, standard blind magazine, available in .243, 30-06 and 7mm Rem Mag
110 Presentation Grade (PE and PEL) - French Walnut Monte Carlo with Rollover stock, standard blind magazine, nickel plated and engraved, available in .243 Win, .30-06 and 7mm Rem Mag
110MC - Select walnut Monte Carlo stock with checkering, standard bline magazine, available in .22-250, .243, .308, .270, and 30-06
110M - Select walnut Monte Carlo stock with checkering, standard blind magazine, available in 7m Rem Mag, .264 Win Mag, .300 Win Mag and .338 Win Mag
110C - Select walnut Monte Carlo stock with checkering, detachable box magazine, available in .22-250, .243, .308, .270 and .30-06
110 "Economy" (E) - Monte Carlo stock with no checkering, standard blind magazine, available in 7mm Rem Mag, .30-06, and .243 Win
100CL - Left hand, select walnut with checkering (no reference or photo to know if it was Monte Carlo or not), detachable box magazine, available in .22-250, .243, .308, .270 and .30-06
110MCL - Left hand, select walnut Monte Carlo stock with checkering, standard blind magazine, available in .243, .308, .270 and .30-06
110ML - Left hand, select walnut Monte Carlo stock with checkering, standard blind magazine, available in 7mm Rem Mag, .264 Win Mag, .300 Win Mag and .338 Win Mag

Everything is basically exactly the same for 1967 and 1968 except the 110E now gets basic checkering on the grip and forend.

For 1969 all the pre-existing models remain unchanged except that the 110M/ML and 110MC/MCL models were discontinued and replaced by the following new model. (note that both standard and magnum calibers offered with same designation for first time)

110 Deluxe (D or DL) - Select walnut Monte Carlo stock with checkering, standard blind magazine, available in 22-250, 243, .308, .270, .30-06, 7mm Rem Mag, 264 Win Mag, 300 and 338 Win Mag

That's strange the pic in post 6 shows a DBM setup. The action even has the extra slots milled on the outside to accommodate the DBM housing.
Strange.

Quote:

---

Originally Posted by motorcyclerider

http://i631.photobucket.com/albums/u...pse4c9e9d0.jpg

---

This photo of the right side of the magazine box clearly shows the release button hardware for the Detachable Box setup. You can also see that the housing attached to the action and the actual magazine box appear to be two separate pieces. If you push in on that metal band on this side at the bend, does the inner housing fall out like it looks like it would?

Quote:

---

http://i631.photobucket.com/albums/u...psaa50aa88.jpg

---

This photo of the left side of the magazine box clearly shows the detachable magazine release spring wire in place on the housing attached to the action.

It's almost like someone just cut the solid bottom off a detachable magazine to make it into a blind magazine box rather than just replacing the whole assembly with a standard blind magazine box.

H was for high polish

mag wells were the same for both blind and detachable. Floor plate (bottom metal) was changed and button was added for the detachable mag.

You can also see the D&T plugs for the rear peep sights that were common in that era

Quote:

---

Originally Posted by jibben

H was for high polish

mag wells were the same for both blind and detachable. Floor plate (bottom metal) was changed and button was added for the detachable mag.

You can also see the D&T plugs for the rear peep sights that were common in that era

---

What is high polished on my unit? And is it common?

Better Scope installed

[IMG]http://i631.photobucket.com/albums/u...ps04852e12.jpg[/IMG]

Yes it does look at the pics below.

[IMG]http://i631.photobucket.com/albums/u...psdcc50c50.jpg[/IMG]

[IMG]http://i631.photobucket.com/albums/u...ps4644de60.jpg[/IMG]

[IMG]http://i631.photobucket.com/albums/u...ps13a4aab3.jpg[/IMG]

[IMG]http://i631.photobucket.com/albums/u...ps5fe26699.jpg[/IMG]

[IMG]http://i631.photobucket.com/albums/u...psa56a1f70.jpg[/IMG]

I can honestly say I've never seen one setup like that before. I've seen numerous guns from the 60's and every single one of them that had a blind magazine had a dedicated blind magazine box like shown in this pic.

http://pics.gunbroker.com/GB/3256310...x499563820.jpg

Quote:

---

Originally Posted by jibben

You can also see the D&T plugs for the rear peep sights that were common in that era

---

Yep, a nice Lyman 48 or 57 WJS would be a nice addition to that gun if you weren't into scopes.

Quote:

---

Originally Posted by jibben

H was for high polish

mag wells were the same for both blind and detachable. Floor plate (bottom metal) was changed and button was added for the detachable mag.

You can also see the D&T plugs for the rear peep sights that were common in that era

---

Can anyone confirm this? And what is highly polished on it?

Here's an idea since you clearly don't want to believe anything anyone on here has told you: Spend the $25 or $30 or whatever it is these days and just get it lettered by John Calhoun. This will tell you everything there is to know about the gun.

http://www.savageshooters.com/showth...Savage-firearm

I just want to know what is Highly polished. What's with the attitude dude? And thanks for the info on the letter.

No attitude, just pointing out the obvious. Every time one of us has told you something in this thread you've questioned it like none of us have a clue what we're talking about - you even tried to turn it into a poll at one point. Mad Dog's by far the most knowledgeable person on this site when it comes to old Savage's and he has access to very specific serial number records. He and I both have copies of most every single Savage Arms catalog going clear back to the 40's and 50's, and a limited selection of catalogs earlier than that. We both have copies of the three books that were printed over the years which cover nothing but Savage firearms - two of which are almost impossible to find these days.

Even with all that reference material to draw from it's still difficult to pinpoint many specifics with Savage firearms because of Savage's own practices throughout the years. Things would (and still do) regularly change with no note of when that change was made (i.e. starting serial number). They've been known to (and still are) to piece odd-ball guns together from whatever surplus parts they have laying around the factory just so they don't go to waste. They always have and still do make a large number of "special order" guns for large distributors (Talo, Jerry's) or retailers (Cabela's, Bass Pro) that aren't cataloged and don't come close to matching anything in the catalog. Now factor in the fact that Savage was sold numerous times over the years and each new owner did a horrible job of keeping/saving records, and in many instances it's dang near impossible to get a 100% positive answer as to who/how/when/what on a given Savage firearm. Go over to the Savage collectors board on the 24hourcampfire website and watch all the Model 99 guru's argue back and forth over exactly what specific model a Model 99 is that someone just posted a picture of.

As for the H standing for "high polish", I'm calling B.S. on that. Why? Because everything that was blued back then had a high polish finish. The only dull finish offered was the low gloss black baked on enamel finish used on some of the cast receivers and small parts on low-end utility models (i.e. parts for the Model 219/220, Model 24's, etc.).

As I said above, I've never personally seen one marked "L-H" before but the only logical explanation for the marking is that it refers to being left handed. That's not to say they didn't use that exact stamping for a number of years, I'm just saying I've never seen it before (late 60's/early 70's era left-hand 110's aren't exactly sitting around every corner you know). Savage never used H to designated any specific feature or option - not then, not now - and that's what leads me to that conclusion. It's not refereed to in any catalog, nor has it ever been referred to in any list or chart I've seen on Savage letter designations. And as I showed you the stamping isn't consistent with how Savage normally expressed a "Series" change.

Whether you want to accept what we tell you or not is totally up to you, but don't act all innocent and offended when we take it as a slap in the face when you question it after we've spent OUR time looking through said reference materials FOR YOU.

Quote:

---

Originally Posted by MrFurious

No attitude, just pointing out the obvious. Every time one of us has told you something in this thread you've questioned it like none of us have a clue what we're talking about - you even tried to turn it into a poll at one point. Mad Dog's by far the most knowledgeable person on this site when it comes to old Savage's and he has access to very specific serial number records. He and I both have copies of most every single Savage Arms catalog going clear back to the 40's and 50's, and a limited selection of catalogs earlier than that. We both have copies of the three books that were printed over the years which cover nothing but Savage firearms - two of which are almost impossible to find these days.

Even with all that reference material to draw from it's still difficult to pinpoint many specifics with Savage firearms because of Savage's own practices throughout the years. Things would (and still do) regularly change with no note of when that change was made (i.e. starting serial number). They've been known to (and still are) to piece odd-ball guns together from whatever surplus parts they have laying around the factory just so they don't go to waste. They always have and still do make a large number of "special order" guns for large distributors (Talo, Jerry's) or retailers (Cabela's, Bass Pro) that aren't cataloged and don't come close to matching anything in the catalog. Now factor in the fact that Savage was sold numerous times over the years and each new owner did a horrible job of keeping/saving records, and in many instances it's dang near impossible to get a 100% positive answer as to who/how/when/what on a given Savage firearm. Go over to the Savage collectors board on the 24hourcampfire website and watch all the Model 99 guru's argue back and forth over exactly what specific model a Model 99 is that someone just posted a picture of.

As for the H standing for "high polish", I'm calling B.S. on that. Why? Because everything that was blued back then had a high polish finish. The only dull finish offered was the low gloss black baked on enamel finish used on some of the cast receivers and small parts on low-end utility models (i.e. parts for the Model 219/220, Model 24's, etc.).

As I said above, I've never personally seen one marked "L-H" before but the only logical explanation for the marking is that it refers to being left handed. That's not to say they didn't use that exact stamping for a number of years, I'm just saying I've never seen it before (late 60's/early 70's era left-hand 110's aren't exactly sitting around every corner you know). Savage never used H to designated any specific feature or option - not then, not now - and that's what leads me to that conclusion. It's not refereed to in any catalog, nor has it ever been referred to in any list or chart I've seen on Savage letter designations. And as I showed you the stamping isn't consistent with how Savage normally expressed a "Series" change.

Whether you want to accept what we tell you or not is totally up to you, but don't act all innocent and offended when we take it as a slap in the face when you question it after we've spent OUR time looking through said reference materials FOR YOU.

---

I am very thankful for everyones help. Thats why I became a paid member. The only reason I kind of questioned answers I got was that everyone had a different one. But I think it's a sure thing a 110ML and the H marking I might one day contact Savage about it and I'll post what they say. Right know I have been shooting it a lot sighting in the new scope and it a sweet shooter :congratulatory:.

Once again thanks guys!

My 67 7mm mag left hand was the same way, other then I had the better stock like the Presentation's. I don't think mine was a presentation as it had the H also instead of the P The mag bax was the same as yours, with the blind plate and no button. Many 67s had the bulge in the barrel yet for the rear sight.

http://img.photobucket.com/albums/v6.../sightboss.jpg
http://img.photobucket.com/albums/v6...agebolt002.jpg
Jan 1968 savage price list
$111.40 wholesale
$148.50 retail

I'm a lot late coming into this. I came across this thread trying to date my 110. Mine is 110C (serial # in upper 105XXX block).22-250 but I have the same stock(minus the recoil pad) and magazine set up. The date stamp on the barrel is 6U. Also have the serial number hand etched on the bolt, which according Wayne Zwoll's "Bolt Action Rifles" pg 493 was standard practice. This thread was helpful, most significantly the letter from the historian. In closing as Mr.Furious said
Even with all that reference material to draw from it's still difficult to pinpoint many specifics with Savage firearms because of Savage's own practices throughout the years.

Quote:

---

Originally Posted by motorcyclerider

I am very thankful for everyones help. Thats why I became a paid member. The only reason I kind of questioned answers I got was that everyone had a different one. But I think it's a sure thing a 110ML and the H marking I might one day contact Savage about it and I'll post what they say. Right know I have been shooting it a lot sighting in the new scope and it a sweet shooter :congratulatory:.

Once again thanks guys!

---

I picked up an IDENTICAL Savage in comparison to yours. My serial is 1115xx and also etched on the bolt. On the left hand side of the barrel the oval is stamped "14u" and on the right hand side with the model it's stamped "110L-D" again, as I said, it's IDENTICAL in that it's a staggered feed blind mag with floor plate and detachable box(option?) and it's a lefty ( yes I'm a lefty) you want to know what the H stands for in L-H and I want to know what the D stands for in L-D!! Obviously its not Left Hand. If you guys need pics I'll post them. I really want to know more about her.

Also, it's a .270 WIN

So we have the same identical guns with different model #'s. Mine 110L-H, yours 110L-D. This is intriguing. Post some picks! I would like just to see it if anything else.

Quote:

---

Originally Posted by Mad Dog

No idea why the bolt is etched, bubba maybe, not factory though.

---

Quote:

---

Originally Posted by deathofamilkjug

Also have the serial number hand etched on the bolt, which according Wayne Zwoll's "Bolt Action Rifles" pg 493 was standard practice.

---

Quote:

---

Originally Posted by iTman

I picked up an IDENTICAL Savage in comparison to yours. My serial is 1115xx and also etched on the bolt

---

There is a pattern starting to form. Anyone else with the serial # etched on the bolt of their older Savage?

Mine has the last 4 digits of the serial engraved on the backside of the bolt body. F3073xx. 110 7mag from the early 90s I believe with the 3 screw trigger.

And the accutrigger centerfeed 110 270 I bought yesterday has the last 4 digits stamped on the bolt face lug but not on the bolt body. G9966xx.

Okay this is an interesting thread and also a bit comical. Anyway I have two rifles. One I bought new in the early 90's and the SN is etch on the bolt. the other one I bought new in early 2000's has the last 4 digits of the SN stamped in the bolt head lug.

Also if I could without hijacking this thread beings we are talking letters I would like to know what the G stands for? I heard that SN's that start with a G are "large shank" actions?

I started cleaning my guns this week and got around to my Savage Arms 110L-H chambered in 7 mm Rem Mag. This brought up past memories of never being able to solve the mystery of why there is a "H" in my Savages model number. So I spend hours on the internet not finding any helpful info. I've looked at old Savage catalogs, other forums, even read books on the history of Savage Arms. None of this has been able to answer the "H" question. I have learned that the bolt having the serial number etched in it was common from the factory when this gun was produced. I have learned the "H" can mean hinged floor plate. But my example doesn't have a hinged floor plate. I have also learned that the 60's through the 80's wasn't the best of times for Savage and the company changed hands many times. All of the catalogs I've seen that list a left handed 110 list the model number as 110L no "H" in sight. This could just turn out as something trivial. For example one of the numerous owners just decided to use the model number 110L-H as left hand. It could also mean some factory worker was just stamping the barrels incorrectly. But I plan on finding out why that "H" got stamped on there. Also anyone with a 110L-H I would recommend hanging on to them. There doesn't appear to be very many of them out there and if there is some cool back story for that damn "H" it could make the gun become more valuable. Rarity usually drives up value.Savage also made guns that other companies that would stamp their name on. Maybe the "H" has something to do with that? People will call me crazy and obsessed buy I must know the answer. I am waiting for a reply back on my request from Savage and as soon as I hear something I will post it here. I'm also kind of hoping someone reads this and already knows the answer. And it turns out to be nothing special. If that is the case my feelings will not be hurt but my curiosity will be filled. The 1st person to give the answer with proof to back it up will get a 1 year subscription to this forum on me.

:help:

Probably just a transition model. The -H could also be that it was a factory conglomeration of spare parts all slapped together. Good luck in your search.

I’ll take a wild stab at this. H=7mm Remington Magnum
Maybe during the time period this rifle was manufactured, whoever owned Savage at the time was jumping on the Mossberg bandwagon and adding the factory chambering to the model number by means of an additional letter to aid in providing the correct replacement parts in the future. It’s a wild stab, but there is evidence in the thread that another 7mm Remington Mag has the same model designation. I’ll even guess that there are additional 270 Winchesters out there with a D suffix......

Quote:

---

Originally Posted by motorcyclerider

I started cleaning my guns this week and got around to my Savage Arms 110L-H chambered in 7 mm Rem Mag. This brought up past memories of never being able to solve the mystery of why there is a "H" in my Savages model number. So I spend hours on the internet not finding any helpful info. I've looked at old Savage catalogs, other forums, even read books on the history of Savage Arms. None of this has been able to answer the "H" question. I have learned that the bolt having the serial number etched in it was common from the factory when this gun was produced. I have learned the "H" can mean hinged floor plate. But my example doesn't have a hinged floor plate. I have also learned that the 60's through the 80's wasn't the best of times for Savage and the company changed hands many times. All of the catalogs I've seen that list a left handed 110 list the model number as 110L no "H" in sight. This could just turn out as something trivial. For example one of the numerous owners just decided to use the model number 110L-H as left hand. It could also mean some factory worker was just stamping the barrels incorrectly. But I plan on finding out why that "H" got stamped on there. Also anyone with a 110L-H I would recommend hanging on to them. There doesn't appear to be very many of them out there and if there is some cool back story for that damn "H" it could make the gun become more valuable. Rarity usually drives up value.Savage also made guns that other companies that would stamp their name on. Maybe the "H" has something to do with that? People will call me crazy and obsessed buy I must know the answer. I am waiting for a reply back on my request from Savage and as soon as I hear something I will post it here. I'm also kind of hoping someone reads this and already knows the answer. And it turns out to be nothing special. If that is the case my feelings will not be hurt but my curiosity will be filled. The 1st person to give the answer with proof to back it up will get a 1 year subscription to this forum on me.

:help:

---

As was already mentioned in a previous post, the "H" likely denotes a series change or just left-hand..

Through the late 70's and possibly into the early 80's Savage used to use Series designations to denote small changes to the models year-to-year. These changes were just to small parts and/or a change in the part supplier. There's no record for these changes so what exactly changed with each Series will always be a mystery. The "-H" is the dead giveaway that it denotes a Series change. Look at all the other model designations at that time, none of them have a dash anything because that's not how they named models.

H has only been used in the model designation to indicate a hinged floorplate in recent years (2005+). Also, Savage didn't come out with a hinged floorplate on the 110 until the early 1970's, and very few of them ever got into the hands of customers as they had a design flaw in the latch (the latch wouldn't stay latched under recoil and would dump the magazine when you would fire the rifle). Those few that did get out were quickly recalled and replaced with a blind or detachable magazine arrangement.

HotOlds442 suggesting maybe it was for the chambering is also incorrect as Savage didn't start using caliber/twist rate codes on the 110's until 2008 and those codes are covered by the barrel nut when assembled on a rifle.

Can you link the post discussing the "H" as meaning a series change?

Quote:

---

Originally Posted by motorcyclerider

Can you link the post discussing the "H" as meaning a series change?

---

Post #12 back on page 1 of this thread:

Quote:

---

Originally Posted by LHitchcox

Just a guess, but maybe Series H? The rifle looks almost identical to my 110CL except for the rear elevation bar. My rifle has a Lyman flip up rear sight. Mine was built in the early 1970s.

---

Whether it's a series number or was for left-hand or whatever makes little difference. Most Savage 110's from that period were just stamped 110 or 110L on the barrel whether they were a 110C, 110E, 110M, 110MC, 110CL, 110ML, or 110MCL or any other variation.