boyds staggerfeed to centerfeed
got an idea, may sound stupid to some but i was thinking that the boyds stocks dont come with pillars correct? if the answer is yes then i should be able to make a oversized pillar to relocate the hole in the stock then do my bedding work and so on. northlander, sharpshooter, anyone else with boyds savage experience what do you think?
should work
Re: boyds staggerfeed to centerfeed
I've seen it done.
You should be able to make it work.
Re: boyds staggerfeed to centerfeed
Ive done it on a Russo stock and it worked great, you need about a 1/2" pillar or bigger to make it work.
Re: boyds staggerfeed to centerfeed
I converted a Bell & Carlson SA stock several years ago before center feed stocks were available. I filled the front stock hole with bondo. Used some touch-up paint. Then drilled a new front hole, installed pillars and bedded the action. Take your time drilling though the metal frame inside the Bell & Carlson stock, or the heat buildup from the drill bit will warp the stock. You should be able to do the same with a wood stock. I would use a wood plug to fill the old hole and drill a new hole. But today, I would just order a laminated CF stock from SSS or a composite CF stock from Stockade Gunstock. But it would make a fun winter project if you've found a cheap Boyd's SF stock. LOL.
Re: boyds staggerfeed to centerfeed
thanks guys i am going to order a boyds jrs in royal jacarinda laminate should look good with the blued action and barrel, anyone know if boyds is behind or caught up?
thanks
james
Re: boyds staggerfeed to centerfeed
Look at the Boyds website and it will show what is in stock, if they don't have what you want check with Stockys. If it is not in stock at Boyds I don't order it but that is just me, I don't like to wait on things.
Bob
Re: boyds staggerfeed to centerfeed
same here bob if i order on monday i want it sometime that week
Re: boyds staggerfeed to centerfeed
The last stock I ordered from Stockys I got in 2 days and I had a tracking number within 3 hours after I ordered it, the last one I ordered from Boyds took about a week to get here.
Bob
Re: boyds staggerfeed to centerfeed
does stockys have the jrs
Re: boyds staggerfeed to centerfeed
It doesn't look like they have any laminated Savage stocks in stock at all right now.
Bob
Re: boyds staggerfeed to centerfeed
Re: boyds staggerfeed to centerfeed
The applejack thumbhole I am starting on next came 4 days after I ordered it from Boyds.
Re: boyds staggerfeed to centerfeed
Hard to go wrong either way, both Boyd's and Stockys are A+ folks to deal with.
Re: boyds staggerfeed to centerfeed
thanks guys i am going to order monday will post pics when the projct is done, thinking of getting the bolt fluted from sharp and a bolt lift kit as well, wont look like a stevens when get done