Does the VLP 112 long action use round rear or flat rear mounts? I searched but did not find an answer. Thanks in advance.
Printable View
Does the VLP 112 long action use round rear or flat rear mounts? I searched but did not find an answer. Thanks in advance.
If it has an Accu-Trigger it would be round rear receiver
Thanks
Now for those that might know what would be a good mount and ring setup for this rifle using a 3x10x50 Meoptic Meostar 30mm scope?
Once again thanks.
Just did my 112 and I used the Burris xtr bases and rings. The base is a 2 piece and I did have to file some off for the scope to fit right (eye relief)the adjustment ring was touching.
As for rings if you use the Burris xtr you will probably need the LOW ring because they are made a lot different height wise than standard rings, but there is a size chart on their web site or in the catalog from Burris.
I have these on 4-5 rifles and find them to be extremely durable and well made.
Well I bought swfa rings and a one piece base. I also ordered a Vortex scope. I think it should work out well.