MY (now) amazing bone stock 111 .270 WCF

I've posted about her a couple times and while she delivered more than sufficient accuracy for any deer hunting use, it seemed she should do better... I bought and mounted a VERY fine Leupold VX1 4x12 and loaded up some nice 130gr Sierra Pro Hunters ( flat base) over 60gr H4831 in neck sized Rem cases ( Lee collet dies are amazing! These cases are on their 30th firing and haven't touched a trimmer yet) lit by Rem 9 1/2 primers OAL 3.265 as this rifle has a short throat.If you try this load REDUCE the powder charge and work up to it. Its a max load in most refrences. This puts the bullet .010 off the rifling.
First range trip gave numerous sub 3/4 inch groups for 3 at 100. Yesterday I took her out and stretched her legs at 2 and 300 yards and was amazed by the 3 rounders i got. At 200 groups ran from 15/16 to an max of 1 1/2 inches. At 300she shot between 2 and 2 7/8 inches. This is a bone stock Model 111 with no bedding work other than freeing up some light tang bearing. Haven't chrono'd this load yet, but zeroed + 2 inches at 100 she landed shots + 1 1/2 at 200 and - 4 5/8 t 300. The same load with Hornady 130's gave 3045 fps.Sierras in this rifle tend to be 50-75fps quicker. Anyway, she does like a fouled bore and the Sierras do a fine job of copper plating things... I'm very happy with my now above average Model 111. I normally use 7x57 class loads in her to reduce recoil,expense and also to preserve case and bore life. Hope these shoot as well as the full throttle stuff!

The deer better beware, you certainly have her dialed in now. What scope did you have on it before?
Don

.270 is my all time favorite caliber. My 110 (another pawn shop rescue) shoots amazingly flat. Same point of impact from 50 to 150yds. You're loading yours a wee bit hotter than I do. Mine is happy with 55.6gr of H4831-sc. Sometimes I think H4831 was made for the .270. They work together perfectly. Here's a 200yd target from mine. It favors 130gr Nosler's & Remington brass...

http://i1075.photobucket.com/albums/...a/DSC07211.jpg

I see quite a few guys using 60gr of H4831. I may just try it someday for the heck of it. For now, the recipe I'm using has been disgustingly consistant. It's my "Blow off steam" rifle. On days when I have to deal with employees whining, customers that can't be made happy & bad days in general, this is the rifle I grab & head off to the range.
Frank in Fla

Try 47 gr of 4064 if you have it. Show us that target.

Your 300 yard target may look like that.

The previous glass was a Valor 4x wit fine crosshair and decent optics for a 1970 production( stamped on the ocular bell). I did and still do good work with a 4x even at extended range. The shakes don't seem to look so bad...