So I recently bought a couple stripped 110 receivers of Gunbroker for a price I couldn’t say no to. I’ve already sourced complete bolts but am struggling to find triggers. Anyone have any knowledge on where I could source them?
Printable View
So I recently bought a couple stripped 110 receivers of Gunbroker for a price I couldn’t say no to. I’ve already sourced complete bolts but am struggling to find triggers. Anyone have any knowledge on where I could source them?
A complete trigger including the hanger and all may be a stretch if you can't source all of the parts from Numrich. Good luck.
You need to know if they are accutrigger type or the old style. The quickest giveaway would be to look at the safety groove. If it's 1/4" wide, it's the old style.....if it's slightly wider with a dovetail, it's an accutrigger (current) style.
Maybe this helps.
https://www.savageshooters.com/content.php?274-Factory-AccuTrigger-Part-Numbers
You can also place an ad in the classifieds section for a complete trigger assy.
If you find one, but it lacks the sear, you can have your gunsmith order a sear from Savage.
There may also be an aftermarket trigger available that does not rely on a factory sear.
If you're unsure what you have, call Savage Customer Service and supply the serial number. They will tell you what it was when it left the factory.
If you luck out on find replacements(they are getting harder to find), Jard makes a 3 lever, self contained unit which replaces all stock components.
I saw that last night. It’s not bad looking and considering i have 53.01 in these two I may order one.Quote:
Originally Posted by Dave Hoback
Sent from my iPhone using Tapatalk
You still need the safety parts.
Safety and bolt releaseQuote:
Originally Posted by sharpshooter
Sent from my iPhone using Tapatalk
Not the release. It’s part of the sear. The Jard is supplied with that.Quote:
Originally Posted by Nickelgl
Got it.Quote:
Originally Posted by Dave Hoback
Sent from my iPhone using Tapatalk
But I guess the safety is hard as anything else to locate. I don’t see any except for the older style. They even make those aftermarket! But the one with the teardrop button....the one EVERYONE has. Yeah, no good on that!
So far I have found one accutrigger assembly and I should have it here today
Sent from my iPhone using Tapatalk