Printable View
What kind of accuracy would be expected from a model 12 in 223 rem. With a durramax stock. Printing about .750 inch with 52 grain hornady match bthp seated to 2.312 and 25 gr. of imr 4895. Shoots 1.5 plus with factory ammo. Shot off bench with bags at 100 yards. Scope is a bushnell banner 6x18. Suspect scope is the problem but wanted to know what kind of accuracy to expect before changing scope.
having 1:9 twist you should try 69 gr bullets
[img width=600 height=449]http://i31.photobucket.com/albums/c381/avboiler11/TgtGfx1.jpg[/img]
12FV .223
Bell & Carlson A2 Medalist
Elite 3200 8-32x40
75gr Hornady HPBT
24.0gr Varget
R-P Brass
CCI200
It'd shoot tighter but I was doing load development and still learning my trigger skillz.
If the sub-MOA you've got with handloads (that halved your factory ammo results) ain't good enough maybe try bedding the Duramaxx or a different load recipe?
With an experienced shooter, shooting tuned ammo, most Savages will shoot around 1/2 MOA. The gun should be able to consistently shoot 5 shoot 100 yard groups at or just under a 1/2 inch, (.5) with an occasional group or two in the .3 area.
IMR 4895 is a good powder for a 223. I have found that N133 works very well in a 223, with 52 gr bullets. I have seen a few guys compete with Model 12 LRPV and shoot great groups averaging in the .4 area all day long, using this combo. You gun should be able to do the same. Another good powder is H335, and H322.
Here is a few pictures of typical groups out of a Model 10 Precision Carbine I had in 223. This gun has a lighter barrel than your 12, and I thought the accu-stock did not stand up to what the laminate stock can produce.
http://i34.photobucket.com/albums/d1...IMG_0082-1.jpg
[img width=405 height=450]http://i34.photobucket.com/albums/d145/82boy/IMG_0080-1.jpg[/img]
[img width=422 height=450]http://i34.photobucket.com/albums/d145/82boy/IMG_0081-1.jpg[/img]
Thanks for the replies here are two 5 shot groups shot today.
http://[[IMG]http://i1099.photobucke.../Target001.jpg /img]
Guess i didn't do something right for the picture.
I'll try it again [img width=327 height=450]http://i1099.photobucket.com/albums/g386/HunterBuilt/Target001.jpg[/img].
[img width=253 height=450]http://i1005.photobucket.com/albums/af171/stumpy400/2010-09-11_20-06-53_399.jpg[/img]
Yes there are 5 in there.
Steve
Why? It will shoot the lighter bullets just fine. In fact for short range work, the flat-base bullets are usually more accurate regardless of twist.Quote:
Originally Posted by jinx-)
My 12FV in .223 hated every factory round I've fed it, but handloads from 50gn-75gn shot well.
Going to try some other loads tomorrow. Anyone have a favorite recipe to try?
sure go for it try some 35 grains why not ;)Quote:
Originally Posted by helotaxi
I've shot 36gn (Varmint Grenades) and they shoot just fine. The only 35gn that I'm aware of are meant for the Hornet and will also shoot fine in reduced loads. They are velocity limited regardless of twist rate.
when you going to call Savage CS and complain about accuracy, first thing they going to ask you: What ammo are you shooting, then they will tell you, that since this is 1:9 twist this rifle is design to shoot 69 gr Federal or Remington something, this is for your knowledge in case you have to call ;-)