Printable View
Does any one make a youth length stock for a SA Stevens. I am moving this summer but once we get all settled in I am thinking of building a Stevens for my kids to shoot and possible get into matches with. Most of the stocks I have seen are right about 13 1/2" LOP or longer. My 9 year old needs some thing closer to 11".
Thanks in advance folks.
Best bet is buying a used wooden stock and cutting it down yourself
Here is a Stevens 200 in 243 Winchester. The stock was a plain jane hardwood sporter stock that I cut 2" off the butt end and installed a grind to fit Pachmayr Decelerator youth pad. I also cut a few inches off the front and recontoured it, and had a factory sporter barrel cut and re-crowned to 18.5" The scope is a Minox ZA-3 in 3-9x40 in Burris Signature rings on Burris standard style bases
For comparison sake, the rifle next to it had the butt cut 1" from stock length before the pad was fit, and it has the factory 7mm-08 22" tube on it.
[img width=600 height=234]http://i38.photobucket.com/albums/e115/rm_5960/PC230039.jpg[/img]
Nice I like what you did there but think my boys would pass on the pink ;) ;D
Think I may look into doing the same thing. Was that the stock that came in the gun or did you buy it separate and if so where at?
Call boyds, they have youth stocks.
btw look at the announcement up top, might save you some heartburn. (thank you for your Service)
Well, its actually tan with black flecks.......
It was from another rifle I had, but these stocks are on sale here and on ebay all the time