Can anyone who runs this combination tell me what size spacer is required? If any.
Do you get good accuracy with this setup?
Printable View
Can anyone who runs this combination tell me what size spacer is required? If any.
Do you get good accuracy with this setup?
Maybe I could if I knew what this "sparrow" was that you're referring to. Last I checked a sparrow was a small bird.
Sparrow is a SilencerCo suppressor designed for .22.
Not sure about any specifics on using the suppressor, but Savage Mark IIs generally do well in the accuracy department - but there can be some that don't. Just like most mass-produced firearms there are good and bad ones.
A big factor that can be overlooked is the torque on the action screws. Some rifles are very picky about the amount.
I've had a Mark II for 20 years, and it has been very good. Recently changed it up with a new stock and scope, and need to do some testing, but accuracy was very good to excellent in the original wood stock.
You might find more info here - https://www.rimfirecentral.com/forum...splay.php?f=24
After years of coveting I now own a Savage MKII fv/sr. I ran it yesterday with my Sparrow on it and it ran great. With the help of a shim kit I was able to get the can screwed on just to the point of engaging the o ring and tighten it. I didn’t shoot for accuracy just for function. Don’t have a scope yet.
On my 10/22 with whistle pig barrel I just remove the o-ring and thread it all the way on. Same on my contender .22 pistol. All the o-ring is is a gas seal. A dab of copper anti-seize and thread it on snug and I have zero issues.