Reloading for MSR 10 in 6.5 Creedmoor

Is it necessary to use a "Small Base" resizing die when reloading for the MSR 10? Does a small base resizing die affect accuracy?
Thanks,
Barney

Shouldn't have to, I didn't on my .308.

If you're reloading brass that was last fired in that same rifle, no. If you're reloading brass that was fired in another make/model rifle you may have to depending on that other rifles chamber dimensions.

Typically (in my experience at least) the only time you need to use a small base die is when reloading cases for one gun that were previously fired in another - usually a semi-auto. You do want to FL size anything you feed into a semi-auto though to ensure reliable feeding.

Quote:

---

Originally Posted by 98dyna

Shouldn't have to, I didn't on my .308.

---

Thank you,
Barney

Quote:

---

Originally Posted by J.Baker

If you're reloading brass that was last fired in that same rifle, no. If you're reloading brass that was fired in another make/model rifle you may have to depending on that other rifles chamber dimensions.

Typically (in my experience at least) the only time you need to use a small base die is when reloading cases for one gun that were previously fired in another - usually a semi-auto. You do want to FL size anything you feed into a semi-auto though to ensure reliable feeding.

---

Thank you,
Barney