-
Pic of BarLoc Inletting
For those of you considering a Barloc and a Boyds AT-One stock here is what I had to trim away. Basically just extending the profile of the Savage action as the Barloc is no bigger than the OD of the action. I used a 1/8 Grooved Rectangle Cutter for wood by Dremel at full rpm to trim it out. A word of caution for any prefit barrel. You need at least 1.60 tenon thread length to have enough thread to accommodate the space used by the Barloc and still headspace.
https://i.postimg.cc/SK2skD2g/Barloc-Boyd2.jpg
