eabco accuracy barrel in .243 1:8 load data requested

Im running a Bartlien 26" barrel 1-8, My favorite load for PRS is 46gr RL26, 105 BTHP hornady, .020 off lands, rings steel consistently out to 1200 yds and is sub MOA everywhere inbetween. 100yd groups avg.2-.3 all day
3108 fps. Not a hot load, no pressure signs at all. Just really hard to keep up with availability of RL26 !!!!H1000 is my second favorite.

What's your H1000 load?

44.8gr H1000 for 2830 fps

Quote:

---

Originally Posted by DogT

I was thinking about getting an ebcco but 2 problems, they don't make 220 Swift for my 112J and I read on some forum that they don't lap their barrels during the finishing and have seen some with issues about the fouling. So I'll pass. Just my 2 cents.

---

Easy enough to lap the barrel yourself however I do agree that a high quality manufacturer should be doing it at the factory. It should be lapped after the chamber has been cut. Then you get even wear across all exposed/leading edges. Essentially eliminating any need for a “break in”