WESTPOINT MODEL 167 parts help
Hi y’all
I'm stripping and fixing up a WESTPOINT MODEL 167 with a .410 bore and with no series letter, beneath it says STEVENS ARMS. I need to order parts from Numrich, though when I speak to customer service they don’t have this shotgun listed and suggest I use the Savage Model 30 and the Savage 67 Series B as closest models. I’ve read about the prolific manufacturing for other brands and that parts are interchangeable, however, I have these questions I hope someone can answer for me.
The Ejector Assembly on Numrich looks like this
http://www.gunpartscorp.com/Search.htm?s=142930 and looks like this is from the 167.
http://i173.photobucket.com/albums/w...psly0xzwt9.jpg
I’m replacing the damaged screws and pins on the receiver, Numrich says I can order from any results for part numbers 1400550 (Trigger Guard Screw) 399300 (Trigger Guard Pin) regardless of the letter after the part number. If this is the case, do you know why 4 of the 30 results specifically mention .410? The Screw and Pin length on this 167 is 1 1/8”, so should I order the .410 or something else?
http://i173.photobucket.com/albums/w...pskhxfjdej.jpg
A few more identifiers and pics that I thought might help:
Cross Bolt Safety (not the top safety)
2 piece Slide Lock Release, Slide Lock and Spring Assembly (part number 995030). Like the .410 version on the Stevens 77 and Coast To Coast 267
http://www.gunpartscorp.com/Search.htm?s=995030 (the release spring needs bending)
http://i173.photobucket.com/albums/w...pshbvzkoir.jpg
Slide Assembly (looks like the 30 SERIES C 410 GA, but firing pin retractor hole is like the 67 Series B 20 Ga.)
http://i173.photobucket.com/albums/w...pst7kbsis3.jpg
It has the Magazine Tube Yoke and Filling Block.
I appreciate any help and value your opinions!
GavinT
