Printable View
I have an older 110 flat back that I am mounting a 6.5-20x50 vortex viper on. I need a one piece mount to get the scope back far enough. Was thinking of getting egw but I'd like somthing a little lower. Was thinking of this mount but not sure yet. Anyone use this one? Does it bring glass back far enough?
http://www.natchezss.com/product.cfm...E48442&src=sim
I use one similar to this on my 110 round back w/ Accutrigger. I know they make on for the flat back, they specifically asked me about it when I ordered mine. Allows for a TON of scope adjustment too! Long tubes and short tubes fit fine. I opted for the extended base for even more adjustment. I believe they do have MOA measurement options as well, if you need that.
http://www.weaveroptics.com/rings_ba...lti-slot_base/
Quote:
Originally Posted by mazda3gun
Will that base for on a 110 flat back short action??
Looking for a base that will fit a Nikon prostaff 3x9x40 on a pre accutrigger flat back .243 LH. The tube on my 3x9x40 is too short. I see them for long action but will they fit short action. Not that educated yet so sorry for the repeated questions.
I ended up going with an EGW rail.
I installed Weavers long action flat back version (48442) on, (as you may have guessed), a long action flat back 110. It allowed me to place the scope as far back as I wanted. For half the price of an EGW base I would say it is well worth the money. Please keep in mind I'm not comparing it to the performance of an EGW base, but if your on a very tight budget you may want to look into one.
I have installed a EGW 0 MOA on my 338-06 and love it. While installing both the Weaver and EGW I took the time to bed them, not sure if it will help but thought I would give it a try.
You're using the exact same scope(most likely) as I have on my 110. It's a round back, 0 MOA, long action, ext. length scope base. With Burris Zee High rings, it clears the obj bell just fine.Quote:
Originally Posted by paradactal
If the Weaver site is too hard to navigate, give them a call. They helped me get the exact piece I needed.
I chose the Weaver over EGW because: a)I'm cheap, most times; b)I shoot a virtually plain 110 30-06 for freezer food and targets for fun, no long range precision or handloading. I mean, it's not like I could bend the base with my hands anyway. I seriously doubt normal hunting and range trips are gonna do that either.
Quote:
Originally Posted by olddav
PM sent.
PM replied