Printable View
I've been looking at BDM's for the one Savage I have (10 FLCP-K) in order to be able to use the same magazines of my other rifles.
Has anyone here put a CDI into an Accustock...my question is how is the fit? Is it flush? I've seen photos of it in different stocks and it looks overly recessed.
I'm borderline on putting the action into a XLR or some other stock simply because I don't utilize the Savage that much.
You are planning on putting a rifle into a 800 dollar stock because you don't use it. HMMM. I am confused. You don't use the rifle because you can't put ten rounds in the magazine? Have you looked into the magazine SSS provides. Double stack short 10rounder that fits in the stock bottom metal. You can get an extended release from egw I think.
The question was "Has anyone here put a CDI into an Accustock...my question is how is the fit? Is it flush? I've seen photos of it in different stocks and it looks overly recessed."Quote:
Originally Posted by stangfish
Don't be confused, but if you haven't put or have a CDI into an Accustock why bother answering with your own questions.
Whether it will be recessed or not is determined by the exterior size/shape of the stock it's going into. Some are thicker in the belly section, some are thinner. The bottom metal has to be a fixed distance from the bottom of the action, thus why the depth will vary from stock to stock. I'm not aware of anyone who's had an Accustock inlet to accept the CDI bottom metal - or even if it would be possible to do, so your best bet would be to just call CDI directly and ask them as they'd be the ones to know.
Quote:
Originally Posted by ODA 0121
My bad.