All,
New kid in town from the Netherlands. Request for help finding the muzzle velocity:
Hornady V-Max 95-grs
Lapua brass, N140, 48.5 grs
Cal 6.5-284
Rifle Savage 12F, Barrel 30", Twist 1 - 8"
Thxs,
Tulip
Printable View
All,
New kid in town from the Netherlands. Request for help finding the muzzle velocity:
Hornady V-Max 95-grs
Lapua brass, N140, 48.5 grs
Cal 6.5-284
Rifle Savage 12F, Barrel 30", Twist 1 - 8"
Thxs,
Tulip
Shoot it through a chronograph.
Do not have chronograph available, hopefully someone shoots this load.Quote:
Originally Posted by sharpshooter
Tulip
tulip,
An estimate from Quickload is 3307 fps (1008m/s) if the COAL is 2.93" (74.37 mm). Chamber pressure 47,879psi (3301 bar). To get a more accurate estimate one needs the exact COAL you use and H2O capacity of the brass. It is only an estimate.
Thnxs for the estimate. I do not know the exact COAL and H2O capacity of the brass. I'm not a reloader myself, I let it done by a gunsmith who does a lot of reloading. Its Lapua brass.Quote:
Originally Posted by johndoe3
Tulip
Not being funny, but the gunsmith who is reloading your ammo should know!
I've checked, his estimate ranges 2900-3100fps.Quote:
Originally Posted by Dennis
I was hoping some shooting the same parameters.
I've to go to a shooting range with one who has a chronometer to know exact speed.
Tulip
This is the only way your going to get your questioned answered correctly!
I never had a 6MMBR V-Max blow up right out of the muzzle, but I did have one explode when it hit a staple holding an old target, under my target. It looked like a small hand grenade went off on the back side of my target, black streaks and lots of cuts in the paper (from the copper I guess), all radiating out from the center hole. Not sure how fast it was moving, (but 3000+?) the barrel is a 1 in 8.
Mike.