Printable View
so i got bored yesterday and made a knob for my rifle. as soon as i can figure out how to post pics i will show some pics. the knob came off of a table saw that i had sitting out in the garage it was an adjustment knob that i did not need. i threw the bolt in a vise, cut off the factory one. then i drilled down the shank and tapped. ran the bolt that was attached to the knob on the table saw into the original bolt handle and whala "tacticool".
I'll give you the common response off of a 4x4 forum I frequent;
"This thread is worthless without pics!"
I love low budget custom projects. If it works, it works!
I prefer "Pics or GTFO"Quote:
Originally Posted by flyinsquirel
So since the point.is raised, how do you post pictures to the site. Is there a thread or a how to somewhere?
I.have a couple of rifles I would like to share pics, but don't know how.
i yhink you may need to upload the pics to photobucket or similar site first
[img][/img]
Just checking what the insert image icon does.
Oh well I guess it is a mystery!
WestPat
1st upload the image to photobucket or some similar website.
http://photobucket.com/
2nd have the website generate an image tag code for use on forum....copy that code.
3rd paste the image tag code into your post and viola an image will appear in your post.
http://i3.photobucket.com/albums/y94...o/100_0419.jpg
The code for the above photo was copied right off my album page on photobucket from a little box that appears beneath each photo in the album.
It is labeled IMG code in the box.
http://i1202.photobucket.com/albums/..._worthless.jpgQuote:
Originally Posted by flyinsquirel